1.What is the principle of contact detection technology and how does it work?
Deformation information is acquired through sensors in contact with the strip surface. A typical example is the "mechanical leveling roller":
Principle: Strip irregularities are converted into minute displacements of the leveling roller. A displacement sensor (such as a differential transformer) mounted on the roller collects the signal, and an algorithm is used to calculate the strip shape deviation.
Features: Simple structure and low cost, but susceptible to oil stains and scale on the strip surface, resulting in low detection accuracy (typically used in low-speed, low-precision rolling mills).

2.What are the common types of non-contact detection technology?
Optical inspection methods include laser scanning and CCD imaging.
The laser scanning method uses a "detection network" of multiple laser transmitters and receivers. Waves in the strip obstruct or alter the laser's propagation path. The receiver uses signal changes to calculate the wave's position and amplitude. The CCD imaging method uses a high-speed camera to capture the strip surface and analyze shape deviations using image recognition algorithms (such as edge detection).
Features: High detection accuracy (wave height detection accuracy can reach ±0.01mm) and fast response speed (sampling frequency can exceed 1000Hz). It is suitable for high-speed, high-precision cold rolling (such as automotive and appliance sheet metal rolling).
Eddy current testing: Utilizes the eddy current effect between the strip (conductive material) and the detection coil. When the strip bends, the change in distance from the coil causes the eddy current intensity to change. The coil voltage signal is then used to infer the strip shape.
Features: Unaffected by light or oil on the strip surface, it is suitable for harsh rolling environments (such as cold rolling with high emulsion concentrations). However, it is less suitable for non-conductive materials (such as coated strip). Stress testing indirectly reflects strip shape by measuring the internal stress distribution of the strip. (Strip shape defects are essentially stress differences caused by uneven stretching of different parts of the strip.) For example, by installing a micro stress sensor on the tension roller, the stress distribution of the strip as it passes is transmitted to the sensor, which is then converted into strip shape data.
Features: It can directly reflect the strip's "intrinsic defects" (avoiding the "false impressions" of surface shape testing). However, the sensor is difficult to install and is easily affected by tension fluctuations.

3.What are the classifications and characteristics of roll bending technology?
Classification: Based on roll type, roll bending can be divided into "work roll bending" (high adjustment accuracy, suitable for small corrections) and "intermediate roll bending" (wide adjustment range, suitable for large corrections, commonly found in six-high mills).
Features: Fast response (adjustments take effect within 0.5-1 second) and simple operation. It is a standard technology for cold rolling mills, especially four-high and six-high mills.

4.What are the typical applications of roller traverse technology?
Typical applications include "intermediate roll traverse" in six-high rolling mills. Intermediate rolls are typically designed with tapered ends. During traverse, the tapered portion "avoids" the strip edge, reducing rolling forces at the edge and thus suppressing edge ripples. Traverse also reduces roll edge wear (uneven edge wear can exacerbate plate shape defects).
Combined with roll bending: Traverse primarily adjusts the edge-to-center roll gap difference, while roll bending provides refined, localized adjustments. Combined, these two methods can address over 80% of common plate shape defects (such as edge ripples, center ripples, and quarter ripples).
5.How to control roll tilt and tension?
Roller tilting: Adjusts the angle between the upper and lower roll axes (e.g., increasing the roll gap on one end and decreasing it on the other) to change the rolling force distribution across the strip width. (For example, if there is edge wave on the left side of the strip, tilt the rolls to narrow the roll gap on the left side and reduce the stretch on the left side.)
Features: Suitable for correcting "single-sided wave" (e.g., left/right wave), but the adjustment range is limited (usually the tilt angle is ≤0.5°), and it must be used in conjunction with roll bending.
Tension control: Adjusts the strip's rolling tension (the pulling force of the front and rear tension rolls) to change the stress distribution in the strip (tension can "flatten" minor waves). If there are minor mid-waves in the strip, increasing the tension can apply tension to the center of the strip, suppressing the wave. However, excessive tension can cause strip breakage, so it is only used as a supplementary measure (usually in conjunction with roll bending).

