Aluminium-Zinc Coated Steel Coil (AZ150): Corrosion, Heat and Application Advantages

Sep 15, 2025 Leave a message

Aluminium-zinc coated steel coil, marketed as aluminium-zinc and designated AZ under EN 10346 and ASTM A792, is the corrosion engineering upgrade of the galvanized family. The coating is an alloy of approximately 55% aluminium, 43.5% zinc and 1.5% silicon, applied by continuous hot-dip processing and solidified into a structure that combines the barrier behaviour of aluminium with the sacrificial protection of zinc. The result is a coated sheet that outlasts pure zinc at equal coating weight in most atmospheres, and this article reviews the chemistry, the advantages and the applications that justify the material.

How the AZ Coating Works

During solidification, the coating forms a two-phase structure: aluminium-rich dendrites that provide the long-term barrier, and a zinc-rich interdendritic network that corrodes sacrificially when the coating is scratched or cut. The silicon addition controls the intermetallic layer at the steel interface, keeping the coating ductile during forming. Because aluminium is the dominant phase, the coating resists atmospheric corrosion with a stable, self-limiting oxide film, and because zinc is still present, exposed steel at cut edges and scratches stays cathodically protected. The coating classes are specified by mass, with AZ100, AZ120 and AZ150 the common structural choices and lighter classes such as AZ50 and AZ70 serving indoor and light-duty work.

Corrosion Resistance: The 2 to 4 Times Advantage

Comparative exposure testing across multiple standards programs has consistently shown that aluminium-zinc coated sheet outperforms an equal mass of pure zinc in atmospheric corrosion resistance, commonly cited as two to four times the service life in the same environment. The advantage is largest in two situations. The first is cut edges, where the zinc-rich phase sacrificially protects the exposed steel while the aluminium matrix slows the overall attack. The second is industrial and coastal atmospheres, where the aluminium oxide film resists the sulphur and chloride attack that consumes pure zinc quickly. The practical effect is that AZ150 sheet is a standard specification for roofing and cladding in coastal regions, where Z275 pure zinc alone is considered marginal.

Heat Resistance Advantage

Pure zinc begins to oxidise and lose protection at continuous service temperatures above about 200 degrees Celsius, and it cannot survive the temperatures reached in oven linings, chimneys and exhaust shields. The aluminium-zinc coating extends that ceiling substantially: AZ-coated sheet withstands continuous service up to roughly 300 degrees Celsius and short excursions higher, which is why it is specified for oven housings, chimney liners, boiler casings and exhaust component shields. The darkening of the surface at high temperature is a cosmetic change, not a loss of protection, until the temperature limit of the alloy is exceeded.

Surface and Aesthetics

The AZ coating has a characteristic silver-grey metallic appearance with a fine spangle that many architects find more uniform and modern than the classic zinc flower pattern. The surface holds paint well after appropriate pretreatment, which is why aluminium-zinc is the preferred substrate for prepainted roofing coil in many markets. For visible cladding and roofing, the aesthetic consistency of the AZ surface reduces the need for painting and gives the building a durable, low-maintenance metallic finish.

Applications of AZ-Coated Coil

Construction consumes the largest volume: roofing sheets, wall cladding, awnings, soffits, gutters and solar mounting structures, where the coating life and cut-edge performance are decisive. Home appliances use AZ-coated coil for washing machine and air conditioner housings, oven and microwave casings, and heat-exposed panels, where the combination of heat resistance and corrosion resistance protects the product in humid kitchens and outdoors. The automotive industry uses it for exhaust shields, heat baffles, fuel tank shields and underbody components, trading some forming depth for the superior coating performance. Agricultural buildings, ventilation ducting and general industrial enclosures complete the picture, always in the same pattern: wherever pure zinc runs short of life, the AZ alloy extends it.

Frequently Asked Questions

What is the composition of the AZ coating?

The alloy is approximately 55% aluminium, 43.5% zinc and 1.5% silicon, per the AZ coating system of EN 10346 and ASTM A792. The silicon controls the intermetallic growth that would otherwise make the coating brittle.

How does AZ150 compare with Z275?

AZ150 is 150 grams per square metre of the aluminium-zinc alloy on both surfaces, while Z275 is 275 grams of pure zinc. Despite the lower mass, AZ150 typically matches or exceeds Z275 in atmospheric service life and beats it clearly at cut edges and elevated temperatures.

Can AZ-coated coil be formed and bent?

Yes. The coating is designed for roll forming, press braking and moderate stamping, and its adhesion is verified by bend tests at the mill. For severe forming, the coating class should be kept moderate and the bend radius should follow the supplier guidance.

Is AZ-coated steel suitable for high-temperature service?

It resists continuous service to roughly 300 degrees Celsius, far above the 200 degree ceiling of pure zinc, and is the standard material for oven casings, chimneys and exhaust shields. Above the limit, the coating degrades and a different protection system is needed.

Does the AZ coating protect cut edges?

Yes, better than pure zinc. The zinc-rich phase in the alloy corrodes sacrificially at the exposed cut edge while the aluminium-rich matrix slows the overall attack, which is why AZ sheet is preferred for roofing where shearing creates long unprotected edges.

What coating classes are commonly supplied?

Typical classes range from AZ50 and AZ70 for indoor light duty, through AZ100 and AZ120 for general building work, to AZ150 and above for coastal, industrial and premium roofing specifications. The class number is the total coating mass in grams per square metre.