1.What is the chemical composition of DX53D+Z galvanized steel?
The carbon content is approximately 0.10%, the manganese content is approximately 0.50%, the silicon content does not exceed 0.30%, the phosphorus content does not exceed 0.035%, the sulfur content does not exceed 0.035%, the aluminum content is approximately 0.015%, the chromium content does not exceed 0.30%, the nickel content does not exceed 0.30%, and the copper content is approximately 0.10%.

2.What are the mechanical properties of DX53D+Z galvanized steel?
The yield strength Rp0.2 is 170-230MPa, the tensile strength Rm is 290-360MPa, the elongation at break As0mm≥34%, the plastic strain ratio r90≥1.3, and the strain hardening index n90≥0.17.

3.What are the coating properties of DX53D+Z galvanized steel?
The coating is pure zinc, available in a variety of coating weights, including Z60, Z80, Z100, Z120, Z150, and Z180, corresponding to a zinc coating weight of approximately 60g/m² to 180g/m². The surface is typically smooth and spangle-free, achieving a surface grade of B, and can be further refined to FC.

4.What is the dimensional accuracy of DX53D+Z galvanized steel?
The allowable thickness deviation varies according to the nominal thickness. For example, when the nominal thickness is 0.50-0.80mm, the allowable thickness deviation is ±0.03mm; the width tolerance is 0-+5mm.
5.How does the coating weight of galvanized steel affect its workability?
The coating weight of galvanized steel (i.e., the mass of the zinc layer per unit area, usually expressed in g/m², e.g., Z60 corresponds to 60g/m², Z120 corresponds to 120g/m², etc.) indirectly or directly affects its processing performance (e.g., adaptability to processes such as bending, stamping, welding, and shearing) primarily through its influence on the zinc layer thickness, the bonding between the coating and the substrate, and deformation coordination.

