Galvanized Steel Coil
Searching for certified S550GD galvanized steel coil for your project? You've found the right partner. As a professional factory with 20 years of experience, GNEE Steel provides fully certified S550GD Galvanized Steel Coil at factory-direct prices. In this guide, we'll detail quality standards, certification processes, and how to verify product authenticity.
Galvanized Steel Coil
S550GD galvanized steel coil is a hot-dip galvanized structural steel grade defined by EN 10346. It features a zinc coating that provides long-term corrosion protection, making it suitable for outdoor and harsh environment applications.
Galvanized steel works by forming a zinc-iron alloy layer on the surface. This layer acts as a barrier against moisture and oxidation, extending the material's service life by 20-30 years compared to uncoated steel.
International Quality Standards for S550GD Galvanized Steel Coil
S550GD Galvanized Steel Coil from GNEE Steel complies with global quality standards:
- EN 10346: European standard specifying requirements for hot-dip galvanized structural steel coils. Defines chemical composition, mechanical properties, and coating thickness.
- ISO 9001: Quality management system certification ensuring consistent production processes from raw material to finished product.
- CE Certification: Mandatory for products sold in the European Economic Area (EEA), confirming compliance with health, safety, and environmental standards.
- ASTM A653: American standard for hot-dip galvanized carbon steel coils, applicable for North American markets.
Certification Process for S550GD Galvanized Steel Coil
GNEE Steel follows a strict certification process for S550GD Galvanized Steel Coil:
- Raw Material Certification: Verify chemical composition and mechanical properties of steel billets from certified suppliers.
- In-Process Testing: Conduct thickness measurements, temperature monitoring, and coating adhesion tests during production.
- Final Product Inspection: Perform tensile, impact, and bend tests on finished coils to confirm mechanical properties.
- Coating Testing: Measure zinc coating weight using magnetic gauges and conduct salt spray tests to verify corrosion resistance.
- Documentation: Prepare mill test certificates (MTC) with complete test results for each batch.
Chemical Composition Verification Table
To ensure quality, S550GD Galvanized Steel Coil must meet strict chemical composition requirements:
| Element | EN 10346 Requirement (Max, %) | GNEE Steel Typical Value (Max, %) | Test Method |
|---|---|---|---|
| C | 0.18 | 0.16 | Spectrometry |
| Mn | 2.00 | 1.90 | Spectrometry |
| Si | 0.50 | 0.45 | Spectrometry |
| P | 0.030 | 0.025 | Spectrometry |
| S | 0.025 | 0.018 | Spectrometry |
| Al | 0.020 | 0.022 | Spectrometry |
Mechanical Property Test Results
The mechanical properties of S550GD Galvanized Steel Coil are verified through rigorous testing:
| Property | Standard Requirement | GNEE Steel Test Result | Test Standard |
|---|---|---|---|
| Yield Strength | ≥550 MPa | 565-580 MPa | EN ISO 6892-1 |
| Tensile Strength | 600-730 MPa | 620-680 MPa | EN ISO 6892-1 |
| Elongation | ≥12% | 13-15% | EN ISO 6892-1 |
| Impact Energy | ≥27 J (-40°C) | 32-38 J (-40°C) | EN ISO 148-1 |
How to Verify Authentic S550GD Galvanized Steel Coil
To ensure you receive genuine S550GD Galvanized Steel Coil, follow these verification steps:
Check the mill test certificate (MTC) for EN 10346 compliance and matching batch numbers.
Verify the zinc coating thickness using a magnetic thickness gauge (minimum 60 g/m²).
Inspect the surface for uniform galvanization (no bare spots or excessive zinc build-up).
Confirm dimensional accuracy with calipers (thickness tolerance ±0.05mm).
Request third-party inspection (SGS/BV) if required for critical projects.
S550GD Galvanized Steel Coil from GNEE Steel meets the highest international quality standards, with complete certification and verifiable performance. Our strict quality control processes ensure consistent, reliable products for your structural projects. Whether you need CE-certified coils for Europe or ASTM-compliant products for North America, we have the expertise to meet your requirements. Contact GNEE Steel now to request certification documents and a quotation for S550GD Galvanized Steel Coil!
| Quality | Material-No. | Standard | Available coatings |
|---|---|---|---|
| S220GD | 1.0241 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ |
| S250GD | 1.0242 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ, +AS |
| S280GD | 1.0244 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ, +AS |
| S320GD | 1.0250 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ, +AS |
| S350GD | 1.0529 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ, +AS |
| S390GD | 1.0238 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ |
| S420GD | 1.0239 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ |
| S450GD | 1.0233 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ |
| S550GD | 1.0531 | DIN EN 10346 | +Z, +ZF, +ZA, +ZM, +AZ |
Click here to get your 2026 latest price list !
Packaging and shipping