S280GD is a structural steel grade per EN 10346, protected by a zinc coating through the hot-dip galvanizing process. Its minimum yield strength of 280 MPa positions it between light structural grades and higher-strength alternatives, offering a practical balance between performance and cost - commonly selected for projects that require enhanced load capacity without sacrificing formability.

Galvanized Steel coil
Key Properties
| Property | Value |
|---|---|
| Minimum yield (Rp0.2) | 280 MPa |
| Minimum tensile | About 360 MPa |
| Minimum elongation A80 | About 18% (varies with thickness) |
| Thickness range | 0.12-6.0 mm (or more on request) |
| Width range | 600-2000 mm, customizable |
| Galvanizing processes | Hot-dip, electro-galvanizing, pre-galvanizing |
Typical composition (typical values for reference, not standard-mandated): C 0.20, Si 0.60, Mn 0.70, P 0.100, S 0.045, Ti 0.025 wt%.
Grade Comparison
| Grade | Yield Strength | Typical Use |
|---|---|---|
| DX51D | Low | Deep drawing applications |
| S250GD | Medium | Light structural use |
| S280GD | Medium-high | Structural and industrial |
| S350GD | High | Heavy-duty structures |
What to Check in a Supplier
Quality control: stable mechanical properties.
Surface quality: clean, uniform zinc coating.
Dimensional accuracy: tight thickness and width tolerances.
Supply capability: stable production and delivery, batch traceability, flexible order quantities.
Processing and Long-Term Benefits
S280GD supports roll forming, bending/profiling, welding with standard procedures, and painting with proper pretreatment (cold forming excellent, welding good, punching stable, painting very good). Thanks to its zinc coating and balanced mechanical properties, it delivers extended service life, reduced maintenance, strong corrosion resistance and reliable structural performance over time.
Available Steel Grade
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
For buyers seeking a dependable S280GD Galvanized Steel manufacturer, material consistency and application knowledge are critical. GNEE STEEL supplies S280GD Galvanized Steel designed to meet structural, industrial, and infrastructure requirements with stable quality and reliable performance.
Selecting S280GD Galvanized Steel ensures a balance of strength, durability, and cost efficiency-making it a practical solution for modern engineering and construction needs.
FAQ:
What is the minimum yield strength of S280GD?
Minimum yield strength (Rp0.2) is 280 MPa.
What is the typical tensile strength?
Minimum tensile strength is around 360 MPa.
What is the minimum elongation?
Minimum elongation A80 is typically 18 % (varies slightly with thickness).
What thicknesses are available for S280GD sheet/coils?
Thickness can range from about 0.12 mm up to 6.0 mm or more upon request.
Can S280GD be supplied with customized widths and lengths?
Yes - widths (e.g., 600–2000 mm) and lengths/coils can be customized.
What types of galvanization processes are used?
It supports hot-dip galvanizing, electro-galvanizing, and pre-galvanizing.

