S250GD+Z galvanized steel is equivalent to?

Jun 16, 2025 Leave a message

S250GD+Z galvanized steel coil is equivalent to?

 

Standard system

Equivalent brand

Key differences

Applicable suggestions

China GB/T

DX52D+Z

Slightly higher elongation (GB/T 2518)

General domestic structural parts

Europe EN 10346

S250GD+Z (original)

Completely the same

Preferred for European standard projects

US ASTM

A653 CS Type B

Stricter sulfur content requirements (S≤0.025%)

North American export projects

Japan JIS

SGCC 250

Zinc layer purity ≥99.8% (JIS G 3302)

Japanese high-end demand

International ISO

CR250GD+Z

Equivalent to European standard technology (ISO 4997)

International general projects

Completely equivalent replacement
DX52D+Z (national standard): Need to verify whether the strength meets the standard (recommended Rp0.2≥250MPa)
SGCC 250 (Japanese standard): cost +12%, suitable for export to Japan projects

 

galvanized steel coil

What is the material of S250GD+Z steel coil?

S250GD+Z is a mid-range galvanized steel that takes into account strength, corrosion resistance and cost, and is suitable for most structural purposes in non-extreme environments.
The base material of S250GD+Z galvanized steel coil is low-carbon steel (C≤0.12%), containing trace alloy elements (such as Mn, P) to improve strength, double-sided hot-dip pure zinc (Zn≥99%), and the coating thickness is controlled by air knife. S250GD+Z is the galvanized steel grade in the European standard EN 10346. The meaning of each code is:
S: Structural Steel
250: Minimum yield strength (250 MPa)
GD: Hot-dip galvanizing (General Delivery)
+Z: Zinc Coating

 

 

What is the difference between S250GD+Z steel and DX51D+Z?

Parameters

S250GD+Z

DX51D+Z

Yield strength

250-330 MPa

140-220 MPa

Coating adhesion

Better (thicker alloy layer)

Standard

Price

5%-8% higher

Economical choice

Applicable scenarios

Load-bearing structural parts

Non-load bearing cover

 

 

What are the advantages of S250GD+Z steel coil?

① Strong versatility
Suitable for structural parts with medium strength requirements, balancing cost and performance.
The galvanized layer provides basic anti-corrosion protection (Z140 coating has no red rust after 500 hours of salt spray test).

② Excellent formability
High elongation (≥22%) is suitable for rolling, bending and other processing.
Reduces 15% rebound compared to high-strength steel (such as S350GD+Z).

③ High cost-effectiveness
The price is about 20% lower than S350GD+Z and 60% lower than aluminum alloy.