Hot Dipped Galvanized Steel Coil
S280GD is a strong, low-alloy structural steel that's widely used in construction and manufacturing. With a minimum yield strength of 280 MPa, it's tough enough for demanding structural tasks. The hot-dip zinc coating provides superior protection against corrosion, guaranteeing extended durability. Thanks to this blend of strength and protection, the S280GD is perfect for structural frames, roofing systems, and other heavy-duty applications.
Hot Dipped Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc's characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.
Hot-dip galvanizing is the process of applying a protective zinc coating to a steel sheet or iron sheet, to prevent rusting.
* Excellent anti-corrosion, paintability, and processability due to the self-sacrificing characteristic of zinc.
* Available to select and produce the desired amount of zinc gilded and in particular enables thick zinc layers(maximum 120g/m2).
* Classified as either zero spangle or extra smooth depending on whether the sheet undergoes skin pass treatment.
Surface Treatment
Spangle is formed during the hot-dip galvanizing process. The size, brightness, and surface of spangles mainly depend on the composition of zinc layer and the cooling method. According to the size, it includes small spangles, regular spangles, big spangles, and free spangles. They look different, but the spangles almost will not influence the quality of galvanized steel. You can choose according to your preference and purpose.
|
Coating designation |
Minimum total coating mass, both surfaces * |
Guidance value for coating thickness per surface |
|---|---|---|
|
Z100 |
100 |
7 |
|
Z140 |
140 |
10 |
|
Z180 |
180 |
13 |
|
Z200 |
200 |
14 |
|
Z225 |
225 |
16 |
|
Z275 |
275 |
20 |
|
Z350 |
350 |
25 |
|
Z450 |
450 |
32 |
|
Z600 |
600 |
42 |
|
ZA095 |
95 |
7 |
|
ZA130 |
130 |
10 |
|
ZA155 |
155 |
11 |
|
ZA185 |
185 |
14 |
|
ZA200 |
200 |
15 |
|
ZA255 |
255 |
20 |
|
ZA300 |
300 |
23 |
|
ZF080 |
80 |
6 |
|
ZF100 |
100 |
7 |
|
ZF120 |
120 |
8 |
|
ZF140 |
140 |
10 |
Available Steel Grade
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
Mechanical Properties
|
Grade |
Yield Strength MPa≥ |
Tensile Strength MPa≥ |
Elongation A%≥ |
|
DX51D Z/ZM/AZ/AM |
240-380 |
270-500 |
22 |
|
DX52D Z/ZM/AZ/AM |
140-300 |
270-420 |
26 |
|
DX53D Z/ZM/AZ/AM |
140-260 |
270-380 |
30 |
|
DX54D Z/ZM/AZ/AM |
120-220 |
260-350 |
36 |
|
S220GD Z/ZM/AM |
220 |
300 |
20 |
|
S250GD Z/ZM/AZ/AM |
250 |
330 |
19 |
|
S280GD Z/ZM/AM |
280 |
360 |
18 |
|
S300GD A/AM |
300 |
380 |
18 |
|
S320GD Z/ZM/AM |
320 |
390 |
17 |
|
S350GD Z/ZM/AZ/AM |
350 |
420 |
16 |
|
S450GD A/AM |
450 |
480 |
15 |
|
S550GD Z/ZM/AZ/AM |
550 |
550 |
- |
FAQ:
What is the material number for S280GD?
The steel number equivalent is 1.0244.
What are common coating types available on S280GD?
S280GD can be galvanized with pure zinc (+Z), zinc-iron (+ZF), zinc-aluminum (+ZA), zinc-magnesium (+ZM), aluminum-zinc (+AZ) and aluminum-silicon (+AS).
What is the minimum yield strength of S280GD?
Minimum yield strength (Rp0.2) is 280 MPa.
What is the typical tensile strength?
Minimum tensile strength is around 360 MPa.
What is the minimum elongation?
Minimum elongation A80 is typically 18 % (varies slightly with thickness).
What thicknesses are available for S280GD sheet/coils?
Thickness can range from about 0.12 mm up to 6.0 mm or more upon request.