Galvanized steel sheet
Galvanized steel sheet is a carbon steel product with a zinc coating, which enhances corrosion resistance and extends service life. It is widely used in automotive, construction, home appliances, and industrial fields.
The S320GD galvanized steel sheet is a high-strength structural grade, favored for its balanced performance and compliance with international standards.
Looking for trusted S320GD galvanized steel sheet suppliers? You've come to the right place. As a direct factory with 20 years of structural steel experience, GNEE Steel supplies EN 10346 compliant S320GD+Z sheets at factory prices. In this guide, we'll detail its strength, coating, and standard specifications for your project.

Galvanized Steel Sheet
S320GD Galvanized Steel Sheet: Definition
S320GD belongs to the hot-dip galvanized structural steel series, designed for load-bearing applications.
The designation breaks down as: "S" for structural use, "320" for minimum yield strength of 320MPa.
"GD" indicates suitability for hot-dip galvanizing, ensuring strong coating adhesion.
It combines high strength, formability, and corrosion resistance, outperforming ordinary galvanized sheets.
Chemical Composition & Mechanical Strength Specifications
The mechanical strength of S320GD is determined by its precise chemical配比, adhering to strict standards.
|
Chemical Element (Wt%) |
EN 10346 Standard Range |
|---|---|
|
Carbon (C) |
≤0.25% |
|
Silicon (Si) |
≤0.60% |
|
Manganese (Mn) |
≤1.70% |
|
Phosphorus (P) |
≤0.10% |
|
Sulfur (S) |
≤0.045% |
|
Mechanical Property |
Specification Value |
|---|---|
|
Minimum Yield Strength |
≥320MPa |
|
Tensile Strength |
360-510MPa |
|
Elongation (A80mm) |
≥20% |
|
Bending Performance |
180° bend without cracking (mandrel diameter = sheet thickness) |
Zinc Coating Specifications of S320GD Sheets
Zinc coating is key to the corrosion resistance of S320GD galvanized steel sheets.
GNEE Steel offers multiple coating weights to match different application environments.
|
Coating Designation |
Coating Weight (g/㎡, double-sided) |
Corrosion Resistance (Salt Spray Test) |
Typical Application |
|---|---|---|---|
|
Z60 |
≥60 |
≥200 hours (no red rust) |
Indoor appliances |
|
Z180 |
≥180 |
≥500 hours (no red rust) |
Outdoor construction parts |
|
Z275 |
≥275 |
≥1000 hours (no red rust) |
Automotive chassis, coastal projects |
Coating adhesion is tested via bend and scratch methods, ensuring no peeling during processing.
Size Specifications & Compliance Standards
S320GD galvanized steel sheets are available in standard and custom sizes for diverse projects.
|
Thickness (mm) |
Width (mm) |
Length (mm) |
Tolerance (Thickness) |
|---|---|---|---|
|
0.3-0.5 |
800-1500 |
1000-2000 |
±0.02mm |
|
0.6-1.2 |
800-1800 |
1000-2500 |
±0.03mm |
|
1.3-3.0 |
800-1800 |
1000-3000 |
±0.05mm |
Key compliance standards: EN 10346 (European), ASTM A653 (American), GB/T 2518 (Chinese).
Each batch comes with a test report to confirm compliance with specifications.
Understanding the specifications of S320GD galvanized steel sheet is critical for project success. From strength to coating, it meets strict international standards for multi-industry use. Check our S320GD galvanized steel sheet specs for detailed test reports, or contact us now to get a 2026 factory price quote and customized size solution!
Get extra 3% off + free sea freight quote!
Available Steel Grade
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |

