What is the spec of DX51D?
DX51D steel products are produced in coils 0.4-1.6 mm thick and 950-1250 mm wide. The inner diameter of the coil is 600±20 mm and outer diameter is up to 1300 mm. Coil weight is up to 8 tons. Coils are supplied with cut edges (mill edges are also possible).
What is DX53D steel equivalent to?
DX53D Steel Equivalent Grades
Under the EN 10346:2009 standard, DX53D corresponds to steel grade 1.0355. In the EN 10346:2015 standard, its equivalent designation is 1.0952.
What is the thickness of DX51D?
0.45-3.00 mm
DX51D is available in thicknesses of 0.45-3.00 mm and widths up to 1520 mm.
What is DX51D equivalent material?
SGCC
DX51D is a European standard, galvanized with 51 steel coil raw materials, equivalent to SGCC. DX51D refers to the bending and forming grade galvanized steel coil sheet, the steel grade serial number is 51, with low carbon steel as the base material.
What is the difference between DX51D and DX52D?
DX51D and DX52D are both hot-dip galvanized steels used for cold forming. DX52D has higher ductility and better elongation than DX51D. DX52D is more suitable for complex forming processes that require greater flexibility, while DX51D is used for standard forming applications.
