Solar installation system on trapezoidal roof

Mar 18, 2024 Leave a message

Trapezoidal shingles are an efficient and cost-effective roof covering material most commonly used on roofs with slopes exceeding 5 degrees. This makes it a common roof covering for large, commercial properties. Due to the combination of a large, often unobstructed area and the existing roof pitch/slope, trapezoidal roofs make an excellent choice for solar PV.
How do you install panels to this roof type? The most common and cost-effective solution for dry ladder mounting systems is micro-rail mounting, where short rail headers are screwed to the roof surface and the panels are then placed directly on on these rails and use panel end and mid-section clamps to hold them in place.

info-929-236

The decision to place modules in portrait or landscape orientation can be influenced by many factors, such as system performance, roof pitch/pitch, roof orientation, or roof obstructions. The cost of installing the system can be significantly affected by the orientation of the panels, as it determines the length of the profiles required. Longitudinal panels mean that the profile extends horizontally and therefore spans the distance between the trapezoidal panel crowns. So, for example, when the crowns are 333mm apart, your outline needs to be slightly longer than that. However, when placing the panels in transverse direction, your profile can extend vertically up the length of the crown and is therefore not affected by crown spacing, meaning that very short profiles can always be used. The shorter the profile, the cheaper the system, so from a system installation perspective, landscape orientation is the cheapest option.