SPCC Mechanical Properties

Aug 15, 2025 Leave a message


The mechanical properties of SPCC (generally cold-rolled carbon steel sheet and strip) are closely related to its low carbon content and cold-rolling process. They primarily exhibit good plasticity, workability, and moderate strength, making them suitable for forming processes such as cold stamping and bending. The following are its key mechanical properties (referenced in accordance with Japanese JIS G3141):
1. Tensile Strength (σb)
Range: 270-370 MPa
Note: Tensile strength is the maximum stress at which a material resists fracture. SPCC's moderate tensile strength ensures stability during cold working (resistance to fracture) without increasing processing difficulty due to excessive strength.
2. Yield Strength (σs)
Range: ≥130 MPa (no upper limit specified; generally increases with cold-rolling deformation).
Note: Yield strength is the stress at which a material begins to undergo plastic deformation. SPCC's low yield strength makes it easily deformable during cold working (such as stamping), making it suitable for forming complex shapes. 3. Elongation (δ)
Range: ≥30% (for specimen gauge length of 50mm)
Note: Elongation is an indicator of a material's ability to plastically deform before fracture. SPCC's high elongation (≥30%) indicates excellent plasticity, allowing it to withstand significant tensile deformation without cracking. This is crucial for cold stamping and deep drawing processes (e.g., complex forming of appliance housings and automotive panels).
4. Hardness
Usually expressed in Brinell hardness (HB) or Vickers hardness (HV):
Brinell hardness (HB): Approximately 60-80 HB (depending on the cold rolling reduction)
Vickers hardness (HV): Approximately 70-100 HV
Note: SPCC has a relatively low hardness, placing it within the mild steel range. This makes it suitable for cold working such as cutting and stamping, and its surface is readily amenable to subsequent treatments such as painting and electroplating. Influencing Factors
The mechanical properties of SPCC are affected by the cold rolling process (such as reduction and annealing):
The greater the cold rolling deformation, the higher the material's strength (tensile strength, yield strength) and the lower its plasticity (elongation).
Annealing reduces strength and further increases plasticity, making it more suitable for high-precision forming.
Application Relevance
SPCC's mechanical properties make it widely used in applications requiring high plasticity and workability, such as:
Automotive parts (instrument panels, door inner panels);
Home appliance housings (refrigerator and washing machine panels);
Hardware (lighting, brackets);
Stampings (various complex thin-walled parts);
In short, with its core mechanical characteristics of "low strength and high plasticity," SPCC is an extremely cost-effective basic material for cold working.