SPCC SGCC HRC G350 G450 G550 Hot Dipped Cold Rolled

Jan 04, 2026 Leave a message

Q: What is the full name and core definition of SPCC?
A: SPCC is an abbreviation for Steel Plate Cold Commercial, referring to general-purpose cold-rolled carbon steel plates/strips under the Japanese JIS G3141 standard. It is made from a hot-rolled substrate through cold rolling at room temperature, emphasizing good surface quality and formability.

Q: Which core standard does SPCC follow?
A: The core standard is the Japanese Industrial Standard JIS G3141, "Cold-rolled Carbon Steel Plates and Strips," which specifies its chemical composition, mechanical properties, dimensional tolerances, surface quality, etc.

Q: What do common suffixes in SPCC (such as SPCC-S, SPCC-1) represent?
A: The suffix indicates annealing and hardness grade: S = annealed, 8 = 1/8 hard, 4 = 1/4 hard, 2 = 1/2 hard, 1 = hard, used to distinguish different strengths and formability.

Q: What is the typical chemical composition range of SPCC? A: C≤0.10%, Si≤0.05%, Mn≤0.50%, P≤0.035%, S≤0.025%, low carbon and low silicon design to ensure high plasticity.

Q: What are the yield strength and tensile strength ranges of SPCC? A: Yield strength Rel=130–300MPa, tensile strength Rm=270–410MPa, with slight differences depending on the hardness grade.