SPCC Sheet Zinc Coating Steel Sheet Coil ASTM 0.5mm Hot-DIP Galvanized Steel Coi

Nov 11, 2025 Leave a message

Q: Is the scrap rate high after SPCE stamping? How to control it?

A: Under normal process conditions, the scrap rate is ≤3%. Key control points: ① Use FC grade surface (reduce scratched scrap); ② Check the material's aging before processing (inventory not exceeding 3 months); ③ Adjust the die clearance to 105-110% of the material thickness (avoid cracking or wrinkling); ④ Regularly test the lubrication effect of the stamping oil.

Q: Can SPCE be used for automotive load-bearing components?

A: No. SPCE has a yield strength ≤220MPa, which is relatively low. It is only suitable for non-load-bearing decorative and interior parts; automotive load-bearing components (such as frames and crash beams) require high-strength steel (such as DP590, HC340LA).

Q: How is the adhesion of coatings on SPCE surfaces? Does it require special treatment? A: Excellent adhesion (cross-cut test ≥ 4B grade), generally no special treatment is required, only: ① Remove surface oil before coating (using alkaline washing or solvent cleaning); ② Slightly sand (Ra=0.3-0.5μm) to improve coating adhesion. This process is often used before coating household appliance casings.

Q: What are the precautions for slitting SPCE steel coils?

A: ① Control the slitting width tolerance within ±0.1mm (to avoid affecting subsequent stamping positioning); ② Deburr the edges after slitting (burr height ≤0.05mm); ③ Maintain uniform tension (50-80MPa) during slitting to prevent camber or coil misalignment.

Q: Can SPCE be used for electroplating (such as zinc plating, chrome plating)? A: Suitable for electroplating. The low carbon content and smooth surface ensure uniform coating. Before electroplating, the following are required: ① Thorough degreasing and rust removal; ② Activation treatment (such as hydrochloric acid pickling). After zinc plating, the corrosion resistance can reach ≥48 hours of neutral salt spray test, meeting the needs of short-term outdoor use.