Specification of SGC440 Galvanized Steel Sheet High Quality Z60 Dx51d

Nov 11, 2025 Leave a message

SGC440 Galvanized Steel Sheet

 

Popular specifications are in short supply!
click to get the specification sheet!

Galvanized sheet refers to a steel sheet with a layer of zinc on the surface. Galvanizing is a commonly used economic method to prevent the surface of the steel sheet from corrosion and extend its service life. A layer of metal zinc is coated on the surface of the steel sheet. This zinc-coated steel sheet is called a galvanized sheet. It is an effective anti-rust method. About half of the world's zinc production is used in this process.

 

SGC440 Galvanized Steel Sheet

Due to different treatment methods in the coating process, the surface state of galvanized sheets is also different, such as ordinary zinc spangles, fine zinc spangles, flat zinc spangles, no zinc spangles, and phosphating surfaces. German standards also stipulate surface levels. Galvanized sheets should have a good appearance and should not have defects that are harmful to the use of the product, such as no plating, holes, cracks, scum, excessive plating thickness, scratches, chromic acid dirt, white rust, etc. Foreign standards are not very clear about specific appearance defects.

 

Specification of SGC440 Galvanized Steel Sheet

 

Thickness of cold rolled steel plate Thickness of galvanized steel sheet Wearing plate+Corrosion resistance plate Galvanized coil+Galvanized coil Ction volume Stainless steel plate Thick plate
0.1mm 0.1mm 1.5mm 0.1mm 0.1mm 1.5mm 18mm
0.2mm 0.2mm 2.0mm 0.2mm 0.2mm 2.0mm 20mm
0.3mm 0.3mm 2.5mm 0.3mm 0.3mm 2.5mm 22mm
0.4mm 0.4mm 2.75mm 0.4mm 0.4mm 2.75mm 25mm
0.5mm 0.5mm 3.0mm 0.5mm 0.5mm 3.0mm 28mm
0.6mm 0.6mm 3.5mm 0.6mm 0.6mm 3.5mm 30mm
0.7mm 0.7mm 3.75mm 0.7mm 0.7mm 3.75mm 32mm
0.8mm 0.8mm 4.0mm 0.8mm 0.8mm 4.0mm 35mm
0.9mm 0.9mm 4.5mm 0.9mm 0.9mm 4.5mm 40mm
1.0mm 1.0mm 4.75mm 1.0mm 1.0mm 4.75mm 42mm
1.2mm 1.2mm 5.0mm 1.2mm 1.2mm 5.0mm 45mm
1.3mm 1.3mm 5.5mm 1.3mm 1.3mm 5.5mm 48mm
1.4mm 1.4mm 5.75mm 1.4mm 1.4mm 5.75mm 50mm
1.5mm 1.5mm 6.0mm 1.5mm 1.5mm 6.0mm 52mm
1.6mm 1.6mm 6.5mm 1.6mm 1.6mm 6.5mm 55mm
1.8mm 1.8mm 6.75mm 1.8mm 1.8mm 6.75mm 58mm
1.9mm 1.9mm 7.5mm 1.9mm 1.9mm 7.5mm 60mm
2.0mm 2.0mm 7.75mm 2.0mm 2.0mm 7.75mm 62mm
2.1mm 2.1mm 8.0mm 2.1mm 2.1mm 8.0mm 65mm
2.2mm 2.2mm 8.5mm 2.2mm 2.2mm 8.5mm 68mm
2.4mm 2.4mm 8.75mm 2.4mm 2.4mm 8.75mm 70mm
2.5mm 2.5mm 9.5mm 2.5mm 2.5mm 9.5mm 72mm
2.6mm 2.6mm 9.75mm 2.6mm 2.6mm 9.75mm 75mm
2.7mm 2.7mm 10mm 2.7mm 2.7mm 10mm 80mm
2.8mm 2.8mm 10.5mm 2.8mm 2.8mm 10.5mm 82mm
3.0mm 3.0mm 11.5mm 3.0mm 3.0mm 11.5mm 85mm
3.2mm 3.2mm 11.75mm 3.2mm 3.2mm 11.75mm 90mm
3.4mm 3.4mm 12mm 3.4mm 3.4mm 12mm 100mm
3.5mm 3.5mm 12.5mm 3.5mm 3.5mm 12.5mm 110mm
3.6mm 3.6mm 12.75mm 3.6mm 3.6mm 12.75mm 120mm
3.8mm 3.8mm 13.75mm 3.8mm 3.8mm 13.75mm 140mm
4.0mm 4.0mm 14mm 4.0mm 4.0mm 14mm 150mm
4.2mm 4.2mm 14.5mm 4.2mm 4.2mm 14.5mm 160mm
4.5mm 4.5mm 14.75mm 4.5mm 4.5mm 14.75mm 170mm
4.6mm 4.6mm 15mm 4.6mm 4.6mm 15mm 180mm
4.8mm 4.8mm 15.5mm 4.8mm 4.8mm 15.5mm 190mm
5.0mm 5.0mm 16mm 5.0mm 5.0mm 16mm 200mm

 

SGC440 Galvanized Steel Sheet