1.What is the corrosion resistance of the passivation layer on the surface of galvanized coils?
The main function of the passivation layer is to prevent the galvanized coil from slowly oxidizing in the air and forming "white rust" (basic zinc carbonate), rather than resisting direct corrosion from highly corrosive chemicals. Its protection focuses more on the atmospheric environment rather than the chemical medium environment.

2.What is the tolerance to alkali?
Weakly alkaline environments (e.g., pH = 8-11):
Performs relatively well. Zinc forms soluble zincates in alkaline environments, but an intact passive film (especially a chromate passive film) can provide a certain barrier, delaying the onset of corrosion.
However, please note: prolonged exposure or elevated concentrations will gradually dissolve and destroy both the passive film and the zinc layer.
Strongly alkaline environments (e.g., pH > 12):
Performs very poorly. Strong alkalis quickly destroy the passive layer and react violently with zinc to form soluble sodium zincate and release hydrogen, causing rapid corrosion of the zinc layer.
Conclusion: Galvanized parts are not suitable for use in strongly alkaline environments (such as concentrated sodium hydroxide solutions).

3.What is the acid tolerance?
Weak acid environments (e.g., pH = 5-7):
They offer some resistance, such as good protection against normal rainwater (which is slightly acidic).
However, even weak acids, if continuously exposed, will slowly degrade the passive film and zinc layer.
Strong acid environments (e.g., pH < 3):
They offer very poor resistance. All types of passive films are rapidly dissolved by strong acids. The acid then reacts directly with the zinc, forming zinc salts and releasing hydrogen gas, resulting in extremely rapid corrosion.
Conclusion: Galvanized parts are absolutely unsuitable for use in strong acid environments (such as hydrochloric acid and sulfuric acid).

4.What are the differences in acid and alkali resistance between different passivation types?
Chromate passivation layer (traditional, best performance but less environmentally friendly)
It provides protection through a combination of a "physical barrier" and "chemical self-healing." When encountering minor pitting corrosion, the soluble hexavalent chromium in the film can migrate to the damaged area, forming a new protective film.
Of the three types of passivation, it has the strongest resistance to weak acids and alkalis, but is still vulnerable to strong acids and alkalis.
Chromium-free passivation layer (modern mainstream, environmentally friendly)
Main components are oxides or complexes of elements such as titanium/zirconium, silicon, and molybdenum.
Its protective mechanism is primarily a physical barrier, with little or no self-healing ability.
Once the passivation film is damaged by acids or alkalis, corrosion directly affects the zinc layer. Its acid and alkali resistance is generally slightly inferior to that of high-quality chromate passivation.
Oil coating
The oil film itself is a hydrophobic organic layer that effectively prevents electrolytes (such as water and saline solutions) from contacting the surface.
However, its protection against strong acids and alkalis is very limited, as many chemicals can dissolve or penetrate the oil film.

5.What is the general function of the passivation layer on galvanized coils?
The passivation layer on galvanized coil is not a panacea; its primary defenses are strong acids and bases.
It offers good resistance to atmospheric corrosion and neutral environments, with limited or short-term resistance to weak acids and bases.
If your operating environment involves chemicals, the specific pH range and chemical type must be evaluated. In highly corrosive chemical environments, stainless steel, aluminum, or sheet materials with stronger organic coatings (such as PVDF or epoxy) may be more suitable.

