galvanized steel coil
Are you sourcing DX51D galvanized steel coil and need clarity on its technical specifications and ideal use cases? GNEE Steel, a leading Chinese manufacturer with two decades of expertise, is here to guide you. This article delves deep into the specifications, properties, and diverse industrial applications of DX51D galvanized steel coil, helping you make an informed procurement decision.

Galvanized steel coil
Galvanized steel refers to steel that has been coated with a protective zinc layer to prevent rusting. DX51D galvanized steel coil is a standard commercial quality grade defined by EN 10346, primarily used for applications requiring good formability and standard corrosion protection. The "D" denotes its suitability for drawing, while common uses include agricultural equipment, storage units, ventilation systems, and light structural components.
Beyond DX51D, grades like DX52D offer better formability for deeper drawing, while DX53D and DX54D are suited for more complex stamped parts and severe forming operations, respectively.
GNEE Steel: Your Expert Partner for DX51D Coils
Choosing GNEE Steel means partnering with a factory that masters the entire production chain. We control the quality of our DX51D galvanized steel coils at every step, from cold-rolled substrate preparation to the precise hot-dip galvanizing process. Our commitment is to deliver coils that perform reliably in your specific application, backed by full certification and traceability.
Detailed Mechanical Properties and Formability of DX51D
The DX51D galvanized steel coil is engineered for general cold forming. Its balanced mechanical properties ensure it can be bent, rolled, or lightly drawn without coating damage or failure.
- Comprehensive Mechanical Properties Table (EN 10346)
| Property | Symbol | Unit | Requirement for DX51D | Typical Value at GNEE |
|---|---|---|---|---|
| Yield Strength (Min) | Re | MPa | ≥ 140 | 160 - 220 |
| Tensile Strength | Rm | MPa | 270 - 500 | 300 - 350 |
| Elongation (A80mm, Min) | A | % | ≥ 22 | 24 - 30 |
| Plastic Strain Ratio (r90, Typical)* | r90 | - | ≥ 1.3 | 1.4 - 1.6 |
| Strain Hardening Exponent (n90, Typical)* | n90 | - | ≥ 0.18 | 0.19 - 0.22 |
| *Note: r90 and n90 values indicate better deep drawing potential in higher grades (DX52D+).* |
Detailed Technical Data & Specification Table for DX51D Coil
For engineers and purchasers, here is a comprehensive table outlining the standard and available specifications:
- Standard Specification Overview Table
| Parameter Category | Detail for DX51D+Z | GNEE Steel Capability |
|---|---|---|
| Standard | EN 10346 | Also supplied per customer-specific standards |
| Base Steel | Commercial Quality Cold Rolled Coil | In-house rolling for quality control |
| Coating Designation | Z100, Z140, Z180, Z200, Z225, Z275 (g/m² total) | All classes available |
| Coating Structure | Pure zinc layer (Z) | Also available as ZF (zinc-iron alloy) |
| Surface Finish | Regular spangle (N), Minimized spangle (M), Smooth (S) | All finishes available; M is most popular |
| Coating Adherence Test | Bend test (d=a, 180°) - No peeling | Guaranteed compliant |
| Dimensional Tolerance | Thickness: ±0.04mm (Std), Width: +5/-0 mm | Tighter tolerances on request |
Common Applications and Recommended Specifications
Selecting the right specification is key to application success. Here's a guide:
- Application-Specific Recommendation Table
| Industry/Application | Recommended Thickness | Recommended Coating (Z-) | Key Reason |
|---|---|---|---|
| Roofing & Wall Cladding | 0.40mm - 0.70mm | Z180 - Z275 | Durability against weather |
| HVAC & Ductwork | 0.50mm - 1.20mm | Z140 - Z180 | Good formability, adequate protection |
| General Fabrication | 0.80mm - 2.00mm | Z100 - Z180 | Cost-effectiveness for indoor use |
| Agricultural Silos | 0.60mm - 1.50mm | Z200 - Z275 | High corrosion resistance in humid env. |
| Electrical Enclosures | 1.00mm - 2.50mm | Z100 - Z140 | Structural strength, moderate protection |
- Select the Right DX51D Galvanized Steel Coil for Your Project
Understanding the detailed specifications and applications of DX51D galvanized steel coil is crucial for project success and cost optimization. GNEE Steel provides not only the material but also the technical expertise to ensure optimal selection for performance and budget. Request a free sample and our full technical datasheet for DX51D galvanized steel coil to verify quality for your specific application.
Get extra 3% off + free sea freight quote!

Packaging and shipping

