1.What are the differences in the core protection mechanisms of ordinary galvanized coils and color-coated galvanized coils?
Ordinary galvanized coil: The zinc layer protects the steel plate through the sacrificial anode effect. After the zinc layer itself corrodes, it forms a zinc oxide/zinc carbonate film to block further corrosion, but the film is relatively fragile.
Color-coated galvanized coil: The galvanized layer provides the base layer for corrosion protection, while the organic coating (topcoat) directly blocks ultraviolet rays, water vapor, and pollutants, forming a dual protection of "physical barrier + electrochemical protection".

2.What is the difference in resistance to atmospheric corrosion?
Conventional galvanized coil:
Corrosion resistance depends on the thickness of the zinc coating. In dry inland areas (such as rural areas), an 80g/m² zinc coating can last 5-8 years. However, in coastal environments (high salt fog) and industrial areas (sulfur-containing pollutants), the zinc coating is rapidly degraded by chloride ions and acidic substances, and red rust (rust on the steel sheet after the zinc coating is completely corroded) may appear in 3-5 years.
Pre-coated galvanized coil:
Organic coatings (such as PVDF topcoat) provide a physical barrier to corrosive media. Even with a thin zinc coating (e.g., 120g/m²), combined with a fluorocarbon coating in coastal areas, the corrosion resistance can reach 15-20 years. Conventional polyester coatings can also extend the lifespan of conventional galvanized coil with the same zinc coating in industrial areas by 2-3 times.

3.What is the difference between UV resistance and aging performance?
Conventional galvanized coil:
Without organic coating protection, the zinc layer is exposed to UV rays for a long time, causing the surface oxide film to become brittle and detach, accelerating zinc corrosion. Furthermore, temperature fluctuations (thermal expansion and contraction) can easily cause the zinc layer to crack, reducing its protective effectiveness.
Pre-coated galvanized coil:
Topcoats (such as SMP and PVDF) contain UV-resistant additives that absorb or reflect UV rays, minimizing coating degradation (such as chalking and discoloration). For example, after 3000 hours of QUV accelerated weathering testing, the color difference (ΔE) of PVDF topcoat is less than 3, whereas conventional galvanized coil may have already exhibited significant corrosion of the zinc layer during this period.

4.What is the difference between temperature and humidity resistance and water vapor permeability?
Conventional galvanized coil:
In high-temperature, high-humidity environments (such as the rainy season in southern China), electrolytes easily form on the zinc surface, accelerating electrochemical corrosion. White rust (a corrosion product of the zinc layer) may appear within 1-2 years, eventually developing into red rust.
Pre-coated galvanized coil:
The primer (such as epoxy) and topcoat form a dense film that blocks over 90% of water vapor penetration. Combined with the passivation layer, it enhances adhesion. In a damp heat test at 85°C/85% RH, no blistering or zinc corrosion occurred within 1000 hours.
5.What is the difference between contaminant resistance and chemical attack?
Conventional galvanized coil:
Sensitive to acid rain (pH < 5.6) and industrial dust (containing sulfides), the zinc layer can be dissolved by the acid, forming localized corrosion pits and shortening its service life.
Pre-coated galvanized coil:
High-quality topcoats (such as PVDF) have a wide acid and alkali resistance range (pH 3-11), resisting corrosion from acid rain and industrial exhaust gases. They also provide more stable performance in urban or industrial areas with high levels of pollutants.

