1.Which type of oiling is suitable for hot-dip galvanized coils?
Oiling Method: Two-roll coating is primarily used (suitable for high-speed continuous production lines), with three-roll coating (thick film) used only for long-term storage/export rolls.
Reason: Although the GI surface is rough, two-roll coating can form a uniform oil film (5-15 mg/m2), meeting the short-term (3-6 months) storage requirements of building materials, home appliances, and other applications. Dip coating (thick film) requires additional degreasing before subsequent processing, increasing costs.
Oil Film Thickness: Light to medium oiling (5-20 mg/m2). Spangle-free GI is slightly less effective than spangled GI (sparkle-free surfaces are smoother, providing more uniform oil coverage and requiring less oil).
Oil Type: Mineral oil-based rust preventative oils are primarily used. For some GIs used on home appliances, easy-to-clean rust preventative oils are recommended (this eliminates the need for heavy degreasing during subsequent painting, reducing the number of steps required). Special treatment: For "GI for outdoor building materials" (such as color-coated substrates), additional "surface passivation" (chromate or chromium-free passivation) will be performed after oiling. The oil film and the passivation film synergistically improve the rust resistance without affecting the subsequent color coating adhesion.

2.Which oiling method is suitable for electro-galvanized coils?
Oiling Method: A high-precision two-roller coating method must be used (some high-end lines use "flexible rubber rollers"). Spraying/dipping methods are strictly prohibited.
Reason: The surface of EG is extremely smooth. Spraying easily produces "spray marks" (affecting appearance), while dipping easily leads to oil film accumulation (causing "oil stain defects" during subsequent precision stamping). Flexible rubber rollers prevent surface scratches while also controlling oil film accuracy (±1mg/㎡).
Oil Film Thickness: Ultra-light oiling (3-8mg/㎡), with some electronic components using EG using as low as 2-5mg/㎡.
Reason: The EG zinc layer is thin. Excessively thick oil films can cause "slippage" during stamping (affecting dimensional accuracy). Electronic components also need to avoid oil contamination of circuitry. Ultra-light oil films prevent rust while reducing subsequent cleaning pressure.

3.Which oiling method is suitable for alloy hot-dip galvanized coils?
Oiling Method: Use only a two-roller coating method (low pressure setting), and hot air drying (50-80°C) is required after oiling.
Reason: GA requires subsequent electrophoretic baking at 120-180°C. If the oil film is not dry or the thickness is uneven, high temperatures can easily cause "oil craters" (affecting the coating appearance). Low-pressure roller coating can avoid scratching the high-hardness GA surface.
Oil Film Thickness: Apply ultra-light oil (3-10mg/m2), with the thickness difference between the upper and lower surfaces ≤ 2mg/m2.
Reason: GA's zinc-iron alloy layer is inherently corrosion-resistant, eliminating the need for a thick oil film for rust prevention. Excessively thick oil films can result in incomplete evaporation during high-temperature coating, leading to film defects (such as pinholes), so thickness must be strictly controlled.

4.Which oiling method is suitable for hot-dip galvanized aluminum-magnesium coils?
Oiling Method: Primarily "no oiling" or "ultra-light oiling." A three-roller coating method (thin oil film) is only used for "extremely long-term storage (over 1 year)."
Reason: GL's zinc-aluminum-magnesium alloy layer forms a dense oxide film, inherently offering strong resistance to salt spray, humidity, and heat. For short-term outdoor use (less than 1 year), oiling is unnecessary. For long-term storage, a thin oil film (5-10 mg/m2) can provide additional rust prevention, avoiding excessive oiling and waste.
Oil Film Thickness: No oiling (0 mg/m2) or ultra-light oiling (3-8 mg/m2), significantly below the GI.
Oil Type: If oiling is used, environmentally friendly rust preventative oils (such as biodegradable ones) are preferred.
Reason: GL is often used in outdoor projects (such as photovoltaic racks and guardrails). Environmentally friendly oils reduce environmental pollution and eliminate the need for subsequent processing (no degreasing).
5.Why are the oiling processes of different galvanized coils different?
The greater the need for rust prevention, the thicker the oil film and the more precise the method. For example, GL (intrinsically corrosion-resistant) can be applied without oil, while GI export rolls (for long-term storage) require a three-roll thick oil film.
The higher the processing precision, the thinner the oil film and the more precise the method. For example, EG precision electronic components (ultra-light oiling + flexible rollers) and GA automotive exterior panels (ultra-light oiling + hot air drying) are used.
The smoother the surface, the less likely it is to have a rough oiling process. For example, EG prohibits spraying or dipping, using only high-precision rollers to prevent surface damage or cosmetic defects.

