What are the protective measures against welding fumes from galvanized coils?

Nov 18, 2025 Leave a message

1.How to control and protect against pollution at the source?

Local Exhaust Ventilation

Welding Fume Purifiers: Use mobile or stationary fume purifiers with flexible suction arms. Position the suction arm's inlet as close as possible to the welding point (typically within 15-30 cm) to capture and filter fumes directly before they reach the worker's breathing zone.

Effect: This is currently the most effective and recommended engineering control measure for welding operations.

General Ventilation

Install high-powered exhaust fans and air supply systems within the workshop to continuously exchange air and dilute the concentration of fumes in the air.

Effect: Supplements local ventilation but cannot replace local exhaust ventilation. Suitable for spacious areas where fumes are not concentrated.

galvanized coil

2.What personal protective equipment is available?

Respiratory Protection (Core)

Powered Self-Contained Breathing Apparatus (PCB): The most comfortable and efficient option. Wear a helmet or hood; the built-in fan filters outside air and delivers clean air, providing some facial protection.

Half-face/Full-face Mask with Filter Cartridge: A filter cartridge specifically designed for metal fumes and fumes must be used (usually marked with P100/R100 or KP100 ratings, color-coded pink, magenta, or red). Ensure the mask fits snugly against the face.

Prohibited Use: Ordinary gauze masks, disposable surgical masks, etc., offer almost no protection against welding fumes.

Other Personal Protective Equipment

Safety Eyes/Face Shield: Protects the eyes and face from welding arc light and spatter.

Protective Clothing/Welding Suit: Made of flame-retardant materials to prevent burns from spatter.

Gloves: High-temperature resistant welding gloves.

galvanized coil

3.What are some points to note in administrative management and work practice?

Training and Education

Welders must be trained to understand the hazards and symptoms of galvanizing fumes (especially metal fume fever) and to be proficient in the use and maintenance of all protective equipment.

Optimize Welding Processes

Weld in well-ventilated areas: Whenever possible, move the workpiece to a well-ventilated area for welding.

Use low-dust welding methods: If possible, consider using welding methods that produce relatively low amounts of smoke.

Remove the zinc plating: Before welding, use a grinding wheel or scraper to remove the zinc plating from the weld area and surrounding area. This is one of the most effective ways to reduce zinc oxide fume generation at its source; although it adds a step, it greatly improves safety.

Hygiene Habits

Eating and smoking are prohibited in the work area: to prevent contaminants from entering the body through hand and mouth contact.

Wash hands and face after get off work: thoroughly wash exposed skin with soap and water after work.

Change work clothes: avoid wearing contaminated work clothes home.

galvanized coil

4.What are the health consequences of these hazards?

Cause: Inhalation of zinc oxide particles from galvanizing fumes.

Symptoms: 4-12 hours after exposure, symptoms similar to a severe cold appear: metallic sweetness in the mouth, dry throat, cough, chest tightness, fatigue, muscle aches, fever, chills, etc.

Characteristics: Symptoms usually subside spontaneously within 24-48 hours, but repeated exposure can cause long-term damage to the respiratory system and overall health.

 

5.What are the four elements of protection?

Preferred: Remove the zinc coating – Before welding, grind off the zinc plating at the weld seam.

Required: Localized ventilation – Use a welding fume extractor to capture fumes at the source.

Essential: Respiratory protection – Wear a P100 level respirator or powered breathing apparatus correctly.

Basic: Enhanced ventilation – Ensure good overall ventilation in the work area.