What are the welding processes for color-coated steel coils?

Nov 28, 2025 Leave a message

1.What are the process flow and requirements for resistance spot welding?

Process: At the overlapping area of ​​the color-coated steel sheets, pressure is applied using copper electrodes while a strong current is passed through. The heat generated by the workpiece's resistance instantly melts the metal, forming a weld joint.

Why it's feasible: The welding process is very rapid, with highly concentrated heat and a relatively small heat-affected zone on the surrounding coating.

Key requirements:

Thorough cleaning is essential: The electrode area where the upper and lower sheets contact must be completely free of coating. Otherwise, the coating will contaminate the electrodes, increase resistance, cause spatter, poor weld strength, and shorten electrode life.

Parameter optimization: The current, time, and pressure need to be precisely adjusted according to the sheet thickness and coating thickness.

Applications: This is one of the most common "welding" methods, widely used in household appliances (such as refrigerator and washing machine shells), and building sandwich panels.

Color-coated rolls

2.What are the process flow and requirements for arc welding?

Process: Continuous welding is performed over a cleaned area using shielding gas and welding wire.

Challenges:

Extremely large heat-affected zone: The high temperature generated by the electric arc can severely burn a large area of ​​the coating around the weld point, causing it to carbonize, peel off, and lose its protective function.

Large cleaning workload: The area requiring cleaning is much larger than the area to be re-welded.

Applications: Rarely used for direct joining of color-coated steel sheets. Unless it is for non-load-bearing structures or structures with low aesthetic requirements, and where strict anti-corrosion repair (such as spraying zinc paint, special anti-corrosion coatings, etc.) is required after welding on damaged areas.

Color-coated rolls

3.What are the process flow, advantages, and disadvantages of laser welding?

Process: Welding is performed using a high-energy-density laser beam as the heat source.

Advantages:

Very small heat-affected zone, minimizing damage to the coating.

High precision, minimal deformation.

Disadvantages:

Expensive equipment.

Extremely strict requirements for assembly clearances.

Coating along the welding path also needs to be cleaned.

Applications: Primarily used in high-end, precision manufacturing fields, such as certain household appliances or special enclosures.

Color-coated rolls

4.What are the advantages and disadvantages of self-tapping screw connections?

The most common method. The screw has a drill bit (self-drilling type) or requires pre-drilling (self-tapping type) to penetrate directly through the coated steel coil and the underlying steel structure.

Advantages: Quick, convenient, low cost, reliable connection.

Key points:

Special screws with weather-resistant sealing washers must be used to ensure waterproofing and airtightness at the puncture site.

The screw material is usually galvanized steel or stainless steel for corrosion resistance.

 

5.What are the advantages and disadvantages of occlusal connection?

A high-end connection method for roof panels. The edges of two panels are rolled and interlocked on-site using a specialized machine.

Advantages:

No perforations, excellent waterproofing.

Clean and aesthetically pleasing appearance.

High structural strength, adaptable to thermal expansion and contraction.

Disadvantages: Requires specialized equipment and skilled workers, resulting in higher costs.