What does the SPCC in SPCC steel specifically mean?

Oct 11, 2025 Leave a message

Q: What does the "SPCC" in SPCC steel specifically mean?

A: SPCC is the designation for cold-rolled low-carbon steel plate in the Japanese JIS G 3141 standard. The letters stand for S (Steel), P (Plate), C (Cold Rolled), and C (Commercial Grade), representing "common commercial-grade cold-rolled steel plate." This designation was later adopted as an equivalent in the Chinese GB/T 11253 standard.
Q: What are the core standards for SPCC steel?

A: There are two main standards: ① China's GB/T 11253 "Cold-rolled Steel Sheet and Strip"; and ② Japan's JIS G 3141 "Cold-rolled Carbon Steel Sheet and Strip." The composition and mechanical property requirements for SPCC in both standards are essentially the same, making them interchangeable.
Q: What is the essential difference between SPCC steel and Q235 steel?

A: The core differences lie in processing technology and performance positioning: SPCC is cold-rolled, focusing on surface finish and basic formability, and is used for stamping and hardware. Q235 is hot-rolled (some cold-rolled Q235 is a derivative grade), emphasizing rigidity and strength, with a yield strength of 235 MPa, and is used for structural parts (such as brackets and shelves).
Q: Are there new and old SPCC grades? Are there alternative grades?

A: There are no new or old grades, but there are equivalent grades: EU EN standard corresponds to DC01, US ASTM standard corresponds to CS Type B, and Korean KS standard corresponds to SPCC (consistent with JIS). When purchasing, you can substitute according to the target market's standards.
Q: Is SPCC considered "low-carbon steel"? What is the carbon content range?

A: It is a typical low carbon steel with a carbon content of ≤0.15% (GB/T 11253 requirement). Due to the low carbon content, it has good weldability and formability, but its hardness and strength are lower than medium and high carbon steels.