ASTM A653 Galvanized Steel
Popular specifications are in short supply!
click to get the specification sheet!
ASTM A653 is the go-to standard for hot-dip galvanized steel sheet. It covers steel sheet in coils and cut lengths, specifying requirements for the properties of the base steel substrate and zinc coating. All galvanized steel in the United States is coated in zinc through a continuous hot-dip galvanizing process. The coating thickness or "coating weight" is directly dependent on how long the steel substrate is in the liquid zinc bath. When hot rolled or cold rolled steel substrates get galvanized it creates a corrosion-resistant finish on top of the steel that performs well outdoors. At GNEE Steel, we stock galvanized steel from 26 gauge to 10 gauge, in every grade from EDDS to HSLA Grade 80, and coating thicknesses from G30 to G235.

Coating Weights: G30 G60 G90 G235 and Beyond
Zinc coating weight matters. We offer galvanized steel with a variety of coating weights, including:
|
Coating |
Zinc Coating (oz/ft², total) |
Thickness per Side (mils) |
Total Coating (mils, both sides) |
g/m² (total) |
|
G30 |
0.30 oz/ft² |
~0.24 mils |
~0.48 mils |
~91 g/m² |
|
G60 |
0.60 oz/ft² |
~0.48 mils |
~0.96 mils |
~183 g/m² |
|
G90 |
0.90 oz/ft² |
~0.76 mils |
~1.52 mils |
~275 g/m² |
|
G235 |
2.35 oz/ft² |
~1.85 mils |
~3.70 mils |
~719 g/m² |
Available Grades
We stock and process galvanized steel in the full range of ASTM A653 grades, including:
- Commercial Steel (CS) – Ideal for bending, moderate forming, and general fabrication
- Drawing Steel (DS) – Offers greater ductility for moderate drawing operations
- Deep Drawing Steel (DDS) – Designed for more complex shapes and deep drawn parts
- Extra Deep Drawing Steel (EDDS) – Suitable for the most severe drawing requirements
- Structural Steel (SS 33–80) – For applications requiring higher strength and less formability
- High-Strength Low-Alloy (HSLA 45–80) – Combines strength with good weldability and formability
Not sure which grade fits your job? Give us a call-we're happy to help.
-
Other information
| Technical Standard | EN10147,EN10142,DIN17162,JIS G3302,ASTM A653 |
| Steel Grade | Dx51D,Dx52D,Dx53D,DX54D,S220GD,S250GD,S280GD,S350GD, S550GD;SGCC,SGHC,SGCH,SGH340,SGH400,SGH490,SGH540,SGCD1,SGCD2,SGCD3,SGC340,,SGC490,SGC570;SQCR22 (230),SQ CR22 (255).SQ CR40 (275).SQ CR50 (340), SQ CR80(550)CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275),SQ CR50(340), SQ CR80 (550); or Customer's Requirement |
| Type | Coil/Sheet/Plate/Strip |
| Thickness | 0.12-6.0mm, or customer's requirement |
| Width | 600mm-1500mm, or according to customer's requirement |
| Type of coating | Hot Dipped Galvanized Steel(HDGI) |
| Coating | 30-275g/m2 |
| Surface Treatment | Passivation(C), Oiling(O), Lacquer sealing(L), Phosphating(P), Untreated(U) |
| Quality | Approved by SGS, ISO |
| ID | 508mm/610mm |
| Coil Weight | 3-7 metric ton per coil |


