DIN EN 10130 DC01 material
DIN EN 10130 DC01 material is a widely used cold rolled low-carbon steel grade defined under the EN 10130 standard for cold-rolled flat products intended for cold forming. DC01 represents the basic cold rolled steel grade with good surface quality, uniform mechanical properties, and reliable workability. It is the most common steel used in general forming operations, light stamping, bending, and various everyday metal applications.
DC01 cold rolled steel is characterized by its consistent thickness tolerance, smooth surface finish, and stable mechanical strength. Manufacturers choose DC01 for applications where moderate forming is required and dimensional precision is essential. Because of its versatility, DC01 can be supplied in coils, sheets, strips, and custom-cut formats.
Key Specifications of DC01 Cold Rolled Steel
The following table summarizes the typical specification range for DC01 cold rolled steel:
| Category | Specification Details |
|---|---|
| Standard | DIN EN 10130 |
| Grade | DC01 (Cold Rolled Low-Carbon Steel) |
| Thickness Range | approx. 0.3–3.0 mm |
| Width Range | up to approx. 1500 mm |
| Surface Finish | Cold rolled, smooth, optional oiling |
| Delivery Conditions | As-rolled, annealed |
| Applications | General forming, light drawing, bending |
The following is a typical chemical composition range for DC01 steel:
| C (Carbon) | ≤ 0.12 | Controls hardness and strength; low carbon ensures high ductility |
| Mn (Manganese) | ≤ 0.60 | Enhances strength and hardenability; improves surface finish |
| P (Phosphorus) | ≤ 0.045 | Increases strength slightly but can reduce toughness |
| S (Sulfur) | ≤ 0.045 | Improves machinability but can decrease ductility |
| Al (Aluminum) | ≤ 0.07 | Used for deoxidation; improves grain refinement and surface quality |
| Fe (Iron) | Balance | Base element of the steel matrix |
Our company can also supply the following cold-rolled steel grades:
| Quality | Material-No. | Standard | Surface refinement | Classification according to EN10020 |
|---|---|---|---|---|
| DC01 | 1.0330 | DIN EN 10130 | +ZE according to DIN EN 10152 | Unalloyed quality steel |
| DC03 | 1.0347 | DIN EN 10130 | +ZE according to DIN EN 10152 | Unalloyed quality steel |
| DC04 | 1.0338 | DIN EN 10130 | +ZE according to DIN EN 10152 | Unalloyed quality steel |
| DC05 | 1.0312 | DIN EN 10130 | +ZE according to DIN EN 10152 | Unalloyed quality steel |
| DC06 | 1.0873 | DIN EN 10130 | +ZE according to DIN EN 10152 | Alloyed quality steel |
| DC07 | 1.0989 | DIN EN 10130 | +ZE according to DIN EN 10152 | Alloyed quality steel |
Mechanical Properties and Workability
DC01 is produced with controlled chemistry and fine cold rolling processes to ensure clean surfaces and good ductility. While not as formable as DC03, DC04, or DC06, it provides the mechanical stability required for common forming operations.
Its mechanical properties allow DC01 to be used in light stamping, appliance parts, automotive brackets, electrical housings, office furniture, and more. The uniformity in yield strength and elongation makes DC01 suitable for both manual and automated processing lines.
Applications in Modern Industry
DC01 material is chosen for applications requiring:
- Reliable cold forming
- Smooth surface for coating or painting
- Precision in thickness and dimensions
- Lightweight structural components
Typical end uses include metal cabinets, machine covers, household appliances, interior panels, fan housings, and fabricated components. Its wide availability and cost-efficiency make DC01 one of the most demanded cold rolled steel grades worldwide.
Manufacturers continue to rely on DC01 for its balance of quality, affordability, and predictable performance. As industries require materials compatible with coating, powder painting, and fine stamping, DC01 remains a highly suitable choice.
GNEE STEEL supplies DC01 cold rolled steel in sheet and coil form, supporting custom sizes, precision slitting, and surface requirements to meet various project specifications.
