What Q195 SGCC Galvanized Steel Coil Means
Q195 SGCC names a galvanized steel coil by combining its substrate and its coating code. Q195 is the base metal: a plain low-carbon structural steel defined in the Chinese standard GB/T 700, in which "Q" stands for yield strength and "195" indicates a minimum yield strength of 195 MPa. SGCC is the product and coating code of the Japanese standard JIS G 3302 for hot-dip zinc-coated steel sheet: S for steel, G for galvanized, C for commercial quality and C for a cold-rolled substrate.
Read together, the designation means a commercial-quality, cold-rolled low-carbon steel strip that has passed through a continuous hot-dip galvanizing line. The zinc layer supplies sacrificial corrosion protection, while the soft Q195 substrate supplies the formability needed for stamping, bending and profiling.
The Q195 Substrate
Standard - GB/T 700, plain carbon structural steel.
Yield strength - minimum 195 MPa.
Carbon content - low, typically 0.12% maximum.
Behaviour - good plasticity and ductility, easy to stamp, bend, roll-form and draw.
Limitation - relatively low strength, so it is not intended for heavily loaded structural members.
The coating code can be decoded one letter at a time:
| Letter | Meaning |
|---|---|
| S | Steel |
| G | Galvanized, that is hot-dip zinc coated |
| C | Commercial quality |
| C | Cold-rolled substrate |
JIS G 3302 sets the mechanical properties, coating mass and dimensional tolerances for this product family. The coating is completed by a zinc weight class, so the same SGCC substrate can be supplied with different protective budgets for different environments.
Cross-Reference to Other Standards
| Standard system | Equivalent grade | Note |
|---|---|---|
| Chinese national standard, GB/T 2518 | DX51D+Z | D for cold forming steel, 51 for ordinary grade, +Z for hot-dip zinc coating |
| European standard, EN 10346 | DX51D+Z | Same designation family as the Chinese grade |
| American standard, ASTM A653 | CS Type B | Commercial steel quality |
| Japanese standard, JIS G 3302 | SGCC | The grade named in the product designation itself |
| Generic trade term | GI | Galvanized iron, a colloquial name for hot-dip zinc-coated steel rather than a specific grade |
Cross-references are indicative rather than interchangeable: mechanical properties, coating mass and tolerances follow the standard actually called on the order and the certificate issued against it.
Core Advantages of the Grade
Low cost with basic rust protection - suited to budget-sensitive parts that need ordinary corrosion resistance.
Easy processing - excellent stamping and bending behaviour, so complex shapes can be formed without cracking.
Paintable surface - after suitable pre-treatment the zinc surface accepts paint or powder coating, so appearance and corrosion resistance can be tuned separately.
Wide availability - produced in large volumes for construction, appliances, hardware and packaging.
Typical Applications
Construction - light steel structure roofs and walls as a low-cost anti-rust solution, ventilation and air ducts that must tolerate humid conditions, guardrails and stair treads where the zinc layer cuts maintenance.
Home appliance manufacturing - electrical control boxes and switch boxes that are stamped and then painted, refrigerator and washing machine back panels produced in high volume.
Hardware and daily goods - shelving and supermarket trolleys that need sufficient strength, and lamp housings and metal furniture that need an attractive rust-free finish indoors.
Packaging - strapping and steel buckles that must outlast plain steel strip in damp storage.
Frequently Asked Questions
Q: What is Q195 SGCC galvanized steel coil?
It is a hot-dip zinc-coated coil whose substrate is Q195 low-carbon steel to GB/T 700 and whose coating and product code, SGCC, comes from JIS G 3302. It is chosen mainly for low-cost protection against rust and corrosion.
Q: Is Q195 SGCC the same as DX51D+Z?
The two are commonly cross-referenced, but they are not identical documents. Q195 SGCC is defined through the GB/T 700 substrate plus the JIS G 3302 coating code, while DX51D+Z is defined in GB/T 2518 and EN 10346.
Q: What does the zinc coating mass mean for service life?
The zinc layer protects the steel by acting as a sacrificial anode, so the larger the coating mass per unit area, the longer the coil resists rust in a given atmosphere. The correct coating mass therefore depends on the exposure, not on the grade name.
Q: Can Q195 SGCC coil be welded?
Yes. Its low carbon content gives good weldability. Zinc coating does produce fume during welding, so the operation needs adequate ventilation and, where appearance matters, the weld zone should be protected against corrosion afterwards.
Q: Can the coil be painted after forming?
Yes. The zinc surface accepts paint or powder coating after appropriate pre-treatment; the coating can also be supplied pre-painted when a colour finish is needed from the outset.
Q: Why is Q195 SGCC not used for high-load structures?
Because the substrate is specified with a minimum yield strength of only 195 MPa, it is intended for lightly loaded panels, housings and formed parts rather than for primary structural members carrying heavy loads.

