hot-dip galvanized steel
DX54D is alloyed hot-dip galvanized steel, which is a kind of shallow-stretched galvanized steel processed with DC04 as the base material, and the surface is plated with a layer of zinc.
D-Stamping Steel
X-cold rolled or hot rolled
54 – Stamping class (the higher the number, the better the stamping performance)
D – hot-dip coated steel plate
Alloyed high-grade steel DX54D is available in the following hot-dip coatings: DX54D+Z (galvanized), DX54D+ZF (galvanized-iron), DX54D+ZA (galvanized-aluminum), DX54D+AZ (aluminum-zinc), DX54D +AS (aluminum-silicon-coated).
Mechanical Properties of DX54D Steel
| Property | Metric | Imperial |
| Tensile Strength | 270 – 370 MPa | 39 – 54 ksi |
| Yield Strength | 120 – 220 MPa | 17 – 32 ksi |
| Brinell Hardness | 90 – 120 HB | 90 – 120 HB |
| Rockwell Hardness | 50 – 65 HRB | 50 – 65 HRB |
| Vickers Hardness | 100 – 130 HV | 100 – 130 HV |
| Elongation | ≥ 36% | ≥ 36% |
| Elastic Modulus | 210 GPa | 30,500 ksi |
| Anisotropy (R-Value, Min) | ≥ 1.6 | ≥ 1.6 |
| Strain Hardening Index (n-Value, Min) | ≥ 0.18 | ≥ 0.18 |
Moderate Tensile and Yield Strength: Provides enough strength for durability without sacrificing formability, suitable for automotive and appliance parts.
High Elongation: Allows significant stretching, enabling complex shapes without cracking.
Good Anisotropy (R-Value): Ensures consistent properties in different directions, reducing defects in deep-drawn parts.
Stable Strain Hardening Index (n-Value): Supports gradual deformation, which helps maintain structural integrity during shaping.
These properties make our DX54D steel ideal for applications that require precision forming and high reliability, helping you to efficiently produce high-quality products that meet your standards.
Surface Treatment of DX54D Steel
In order to improve the corrosion resistance, wear resistance and appearance of DX54D steel, we provide a variety of surface treatment methods:
Passivation or Chromate Coating: Applied post-galvanizing to prevent oxidation and enhance corrosion resistance.
Phosphating: Promotes paint adhesion, commonly used in automotive and appliance finishes.
Organic or Epoxy Coatings: Provide added protection for parts exposed to wear or extreme environments.
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |