What is the complexity of DC07's production process?

Aug 15, 2025 Leave a message

1.What are the raw material purity requirements for DC07?

To ensure high ductility and good formability of steel plates, the impurity content in the raw materials must be strictly controlled. Production typically involves the use of carbon-free ladles, carbon-free tundishes, specialized carbon-free covering agents, and ultra-low carbon mold slags. Key control points are carefully controlled to reduce the content of elements like carbon and nitrogen, ensuring the purity of the steel.

DC07

2.What are the requirements of DC07 for hot rolling process?

DC07 requires optimized hot-rolling and controlled cooling processes. Precisely controlling parameters such as rolling temperature, speed, and cooling rate effectively improves the steel's internal quality, refines grain size, and achieves excellent microstructure and properties, laying the foundation for subsequent processing. Improper control can compromise the steel's strength and toughness.

DC07

3.What are the requirements of DC07 for the pickling process?

The pickling process requires high-reduction rolling, which places high demands on the equipment's pressure and precision. At the same time, parameters such as acid concentration, temperature, and pickling time must be precisely controlled to remove surface oxides, reduce surface defects, and ensure surface quality and dimensional accuracy.

DC07

4.What are the requirements for DC07 annealing process?

DC07 is typically annealed using a continuous annealing process. Due to its soft material, strip warping is prone to occur within the heating furnace. Therefore, precise control of parameters such as annealing temperature, speed, and tension is required. Maintaining a stable speed minimizes tension fluctuations, reduces the chance of strip warping, and avoids problems such as strip deviation and breakage. This process also eliminates internal stresses and optimizes the steel's plasticity and toughness.

 

5.What are the requirements of DC07 for flatness control?

DC07 steel is a soft material, and the tail-swinging process in hot and pickling mills results in tension-free rolling. This leads to uneven internal stress distribution in the strip and poor strip shape. This necessitates the use of advanced strip shape control technologies during the rolling process, such as roll profile design, hydraulic roll bending, and roll shifting, to precisely control the strip shape. Failure to do so will negatively impact subsequent processing and product quality.