1.What are the differences between standards systems and their sources?
SPCC: Japanese Industrial Standard JIS G 3141.
DC01: European Standard EN 10130

2.What are the differences between the surface and the treatment state?
SPCC: Usually followed by a surface finish designation, such as SPCC-SD (plain finish), SPCC-BD (bright finish).
DC01: Standards specify the surface grade (e.g., FB - higher grade, FC - advanced grade) and surface treatment (e.g., U - untreated, S - chemical passivation, O - oiling, etc.). For example: DC01+U (untreated), DC01+S (chemical passivation).

3.What are the differences in their main uses?
SPCC / DC01 Typical applications: appliance housings, office furniture, filing cabinets, automotive interior structural parts, light brackets, hardware, toys, simple containers, etc.

4.How does its current usage differ in China?
"SPCC" has become a common commercial name: In the Chinese market, due to historical reasons and the early influence of the JIS standard, "SPCC" has almost become synonymous with ordinary cold-rolled steel sheet. Many steel mills and traders also habitually refer to ordinary cold-rolled steel sheets produced according to Chinese standards (GB) as "SPCC," even though their actual chemical composition and properties may be closer to DC01 or fall somewhere in between.
"DC01" represents a more standardized European standard: When DC01 is explicitly specified, it usually means that customers (especially European customers or foreign-invested enterprises) have stricter and more standardized requirements for the composition and properties of the material, and that supply chain management is more standardized.
5.What are the options and alternative products?
In most general applications, SPCC and DC01 are interchangeable.
For projects exported to Europe or with stringent supply chain requirements, DC01 should be specified first, and acceptance should be based on EN 10130 standards.
When procuring domestically, if SPCC is specified on the drawings, the standard it follows (whether it is JIS or GB/T 5213), as well as the specific chemical composition and mechanical property requirements, should be clearly stated in the contract or technical agreement to avoid disputes.

