Utilization Rate of Cold-Rolled Coil Blanks

Mar 11, 2026 Leave a message

What Is the Blanking Utilization Rate

The blanking utilization rate is the percentage of cold-rolled coil material that is used and ultimately becomes qualified finished products. The calculation formula is the total weight of finished parts divided by the total weight of cold-rolled coil consumed, multiplied by 100 percent. It is a key indicator for measuring whether materials are wasted during stamping and blanking.

Typical Utilization Rates

Typically the rate ranges from 60 to 85 percent. Simple stamping with ordinary dies achieves about 60 to 70 percent; optimized layout such as progressive dies or double-row dies can reach 75 to 85 percent; and in ideal conditions with regular part shapes and no overlapping edges it can exceed 90 percent, though this is difficult to achieve in practice.

Factors That Determine Utilization

Three main factors apply. First, the shape of the part: square parts save more material than round parts, and irregularly shaped parts generate more waste. Second, process waste: overlapping edges between parts, edge positioning, and head and tail cutting. Third, the width of the sheet metal: a mismatch between roll width and part size leads to excessive side waste.

How to Improve Low Utilization

Three directions can be explored. Optimize the layout design using diagonal or nested layouts; customize the roll width to reduce side waste; and evaluate and modify the local shape of parts to reduce irregular protrusions within permissible limits. Combining these measures can lift utilization by 5 to 15 percentage points in typical stamping shops.

Why Utilization Matters

Utilization directly determines cost. The lower the utilization rate, the higher the proportion of purchased steel that becomes scrap. For example, a decrease in utilization from 80 to 70 percent is equivalent to a hidden increase of about 15 percent in the material cost per ton of finished product, which is significant in high-volume stamping operations.

Frequently Asked Questions

Q: What is the typical utilization rate for cold-rolled coil blanks?

A: Typically 60 to 85 percent, with simple stamping at 60-70 percent and optimized layouts reaching 75-85 percent.

Q: How is utilization calculated?

A: Total weight of finished parts divided by total weight of coil consumed, multiplied by 100 percent.

Q: What is the biggest factor affecting utilization?

A: Part geometry and the layout arrangement, followed by process waste and coil width matching.

Q: How can utilization be improved?

A> By optimizing nesting layouts, customizing coil width, and modifying part shapes to reduce waste within design limits.

Q: How much cost does low utilization add?

A: A drop from 80 to 70 percent utilization adds about 15 percent hidden material cost per ton of finished product.

Q: Can utilization exceed 90 percent?

A: Only in ideal conditions with regular part shapes and no overlapping edges, which is rare in practice.

For cold-rolled coil supply with width customization to improve your utilization, contact our sales team.