During the use of galvanized steel grating, some technologies need to be adopted to better utilize its performance advantages. Some users do not know how to fix galvanized steel grating, so there are some problems during use. Next, some practical skills will be shared.
We use three methods to install galvanized steel gratings: direct welding; mounting gratings with installation clips for galvanized steel gratings; and embedded angle installation.
Each of these three galvanized steel grating installation methods has advantages and disadvantages. The installation method should be selected according to the specific situation and environment. The following is an introduction by GNEE STEEL Co., Ltd. to the advantages and disadvantages of each galvanized steel grating installation method.
The welding and fixing of galvanized steel grating is a common installation and fixing method. The four points around the galvanized steel grating are generally welded. The galvanized steel grating can basically be fixed. If the galvanized steel grating is often subjected to If heavy objects are pressed, multiple welding points should be added. The welding and fixing method of galvanized steel grating is simple and firm. The method of fixing galvanized steel grating is also relatively common. Galvanized steel grating is generally performed on mechanical equipment. common.
The advantage of the galvanized steel grating mounting clip is that it is easy to disassemble and does not require welding spots. The galvanized layer of the galvanized steel grating is not damaged. In some special projects, it is required that there are no welding spots on the surface of the galvanized steel grating. The zinc layer must not be damaged at all and can only be fixed on the supporting steel beams using installation clips. However, the price of each installation clip is not cheap. There are three types of installation clips for ordinary galvanized steel grating, depending on your usage. Choose a different mounting clip.
Galvanized steel grating trench covers are often fixed with angle steel in pipeline trenches. Two angle steels are fixed on both sides of the trench. The galvanized steel grating trench cover is pre-embedded in the trench cover. This method eliminates the need for welding. Fixed with mounting clips, the fixing method of angle steel is simple and practical, and the galvanized steel grating is easy to disassemble, which facilitates subsequent equipment maintenance. The disadvantage is that it is easy to be lost and stolen, so the angle steel inlaid fixation method is usually only used in factories and workshops.
Learn more and contact us now!