What safety precautions should be taken during operation?

Oct 15, 2025 Leave a message

What safety precautions should be taken during operation?
Wear protective equipment (acid-resistant gloves, protective clothing, goggles) and avoid contact of the plating solution with skin.
Cyanide plating solution should be stored separately. Do not eat or drink while operating to prevent poisoning.
Pay attention to electrical safety during electrolysis to avoid short circuits or electric shock.


How is waste gas handled?
Acid mist generated during pickling and passivation should be collected using a gas hood and treated in an alkaline solution absorption tower before discharge.
Water vapor generated during heating of the plating solution should be exhausted to maintain ventilation in the workshop.


How is waste plating solution and waste residue disposed of?
It should not be discharged directly. Instead, it should be handed over to a qualified hazardous waste disposal company for harmless treatment in accordance with environmental regulations.
Waste residue containing heavy metals (such as sediment) should be collected separately and avoided being discarded carelessly.


How can energy consumption during electrogalvanizing be reduced?
Optimize current density to avoid excessive current that wastes energy.
Use insulation to reduce heat loss during bath heating. Select high-efficiency electrode materials to reduce energy loss during the electrolysis process.


What standards must an environmentally compliant electrogalvanizing process meet?
Highly toxic substances (such as cyanide, which may be exempted in some areas but must be strictly controlled) are prohibited.
Wastewater and exhaust gas emissions must comply with the "Electroplating Pollutant Emission Standard" (GB 21900).
Products must comply with environmental directives (such as the EU RoHS and the US CPSIA) to limit heavy metal content.