What type of steel is used as the raw material for cold-rolled coils?

Feb 26, 2026 Leave a message

1.What are some common types of steel that meet Chinese national standards?

Q195, Q215, Q235

Ordinary carbon structural steel. Q235 is the most widely used due to its good overall performance.

cold-rolled coil

2.What are some commonly used steel materials according to Japanese standards?

SPCC, SPCD, SPCE

These represent general-purpose, stamping, and deep-drawing cold-rolled carbon steel sheets, respectively. Higher grades indicate better elongation and stamping performance.

cold-rolled coil

3.What are some commonly used steel materials according to European/German standards?

DC01, DC03, DC04

Widely used in Europe, a higher number (such as DC04/ST14) indicates a softer material and better deep-drawing performance.

cold-rolled coil

4.How to analyze raw materials based on their chemical composition?

SPCC / DC01: Suitable for general stamping and forming

SPCD / DC03: Suitable for more complex stamping processes, with lower carbon content.

SPCE / DC04: Suitable for deep drawing, low carbon content, high elongation.

 

5.Why can hot-rolled coils be used as raw materials?

Dimensional Transition: Hot-rolled coils are typically thicker (e.g., 1.5-6mm or more). Cold rolling (rolling at room temperature) can reduce their thickness to 0.2-4mm, achieving more precise thicknesses.

Improved Performance: Hot-rolled coils have iron oxide scale on their surface and their properties are not uniform. Cold rolling and subsequent annealing treatment can produce cold-rolled products with high surface finish, high dimensional accuracy, and good mechanical properties.