Z275 g/m² 0.20 mm 20 mm Galvanized Steel Strip Smooth Spangle-free

Popular specifications are in short supply!
click to get the specification sheet!

Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.

Galvanized steel is among the most popular steel types because of its extended durability, having the strength and formability of steel plus the corrosion protection of the zinc-iron coating. The zinc protects the base metal by acting as a barrier to corrosive elements, and the sacrificial nature of the coating results in a long-lasting and high-quality steel product.
 

This versatility makes it applicable to a variety of projects and industries, including agriculture, solar, automotive,construction, and so on. 

The steps in the galvanizing process are as follows:
* The steel is cleaned in a degreasing solution
* After being cleaned, the steel is pickled by being lowered into a vat of diluted hot sulfuric acid
* The steel is then fluxed in an aqueous solution (typically zinc-ammonium chloride)
* After the flux, the steel is galvanized through immersion in a vat of molten zinc
* Afterward, the steel is inspected for consistency and a complete coating

• Low initial cost compared to most treated steels. In addition, galvanized steel is immediately ready to use when delivered. It does not require additional preparation of the surface, inspections, painting/coatings, etc. sparing companies more costs on their end.
• Longer life. With galvanization, a piece of industrial steel is expected to last more than 50 years in average environments, and can last over 20 years with severe water exposure. There is no maintenance required. The increased durability of the steel's finished product also increases the product's reliability.
• The sacrificial anode ensures that any damaged steel is protected by the surrounding zinc coating. It doesn't matter if the steel section is completely exposed; the zinc will still corrode first. The coating will corrode preferentially to the steel, creating a sacrificial protection to the areas that are damaged.
• Rust resistance from the zinc coating. The iron elements in steel are incredibly prone to rusting, but the addition of zinc acts as a protective buffer between the steel and any moisture or oxygen. Galvanized steel is very protective, including sharp corners and recesses that couldn't be protected with other coatings, making it resistant to damage.

Click to get today's price list!