Steel Used In Freezer
Popular specifications are in short supply!
click to get the specification sheet!
Originally used in shopping malls, supermarkets, and hotels, freezer is popular in households now. It is used in a gentle environments and has similar structure as refrigerator. The trend is to use thinner sheet with high strength.
1. Case Side Plate
Part requirements: Proper stiffness, movable; Flat and straight; Proper hardness and no deformation after foaming.
Material Requirements: Flat and Straight; Thickness≥0.35mm; Hardness HRB≥40
Recommended materials:
|
Part No. |
Part No. |
Type |
Grade |
Size(mm) |
Specialty |
|
1 |
Case Side Plate |
General cold rolled steel |
BLC-JD2 |
0.4-0.5 |
Spray painting after parkerizing |
|
Prepainted Steel |
TSECD |
0.4-0.5 |
Oil-resistant coating; |
||
|
TDX52+Z |
2. Door panel
Part requirements: Flat and straight; Proper hardness and no deformation after foaming.
Material Requirements: Flat and straight; Hardness HRB≥40
Recommended materials:
|
Part No. |
Part No. |
Type |
Grade |
Size(mm) |
Specialty |
|
2 |
Door Panel |
General cold rolled steel |
BLC-JD2 |
0.4-0.5 |
Spray painting after parkerizing |
|
Door panel |
TSECD |
0.4-0.5 |
Oil-resistant coating; |
||
|
TDX52+Z |
3. Hinge Plate
Part requirements: Proper strength and stiffness; No deformation when bearing weight.
Material Requirements: Flat ; Y.S ≥300MPa.
Recommended materials:
Part No. |
Part No. |
Type |
Grade |
Size(mm) |
Specialty |
|
3 |
Hinge Plate |
General cold rolled steel |
SPCC |
2.0 |
Spray painting after parkerizing |
4. Case Back Plate
Part requirements: Flat and Straight, no exceptional requirement.
Material Requirements: Flat and straight; Easy for assembly.
Recommended materials:
Part No. |
Part No. |
Type |
Grade |
Size(mm) |
Specialty |
|
4 |
Case Back Plate |
General cold rolled steel |
BLC-JD2 |
0.4-0.5 |
Spray painting after parkerizing |
|
Door panel |
TSECD |
0.4-0.5 |
Oil-resistant coating; |
||
|
TDX52+Z |
5. Base Plate
Part requirements: Work well in moist environment.
Material Requirements: Corrosion-resistance;Good forming performance.
Recommended materials:
Part No. |
Part No. |
Type |
Grade |
Size(mm) |
Specialty |
|
3 |
Base Plate |
General cold rolled steel |
SPCC |
1.5 |
Spray painting after parkerizing |
6. Compressor Motor
Part requirements:Low noise level;Smaller; Energy-efficient;
Material requirements: Small thickness tolerance; high magnetic induction; Low iron loss;Flatness
Recommended materials:
Part No. |
Part No. |
Type |
Grade |
Size(mm) |
Specialty |
|
6 |
Compressor Motor |
Electrical steel |
B50AE-3 |
0.5 |
High-efficiency |
|
B50A470 |
environmental friendly |
||||
|
B50A800 |
|||||
|
B50A350 |
7. Compressor Case
Part requirements: Improved welding and coating property;Pressure-resistant
Material requirements: Deep drawing quality; Uniform performance.
Recommended materials:
Part No. |
Part No. |
Type |
Grade |
Size(mm) |
|
7 |
Compressor Case |
Pickled steel |
SPHD,SPHE |
2.6-4 |
Packaging and delivery
Popular specifications are in short supply!
click to get the specification sheet!