35KV Class Three Phase Oil-Immersed Distribution Transformer

The 35KV three-phase oil-immersed distribution transformer complies with ANSI C57.12.00 IEC60076, GB1097 (power transformer) and GB/T6451 (technical parameters and requirements for three-phase oil-immersed power transformer) standards, and the no-load loss and load loss are extremely low Multiple, high-quality C.R.G.O. iron core type, high-quality oxygen-free copper coil, beautiful appearance, safe operation, widely used throughout the country.

A distribution transformer is also known as a typical kind of isolation transformer. The main function of this transformer is to alter the high voltage to the normal voltage like 240/120 V to use in electric power distribution. In the distribution system, there are different kinds of transformers available like single phase, 3-phase, underground, pad-mounted, pole-mounted transformer.

35KV Class Oil-Immersed Distribution Transformer

Features of Three phase Oil-immersed Distribution Transformer

•Unique Welding Process, No Leakage

Eliminate the high and low pressure risers to reduce welds; the fuel tank wall uses wide-width steel plates to reduce joints; a unique welding process to ensure welding quality.

•Groove Structure

All sealing flanges are grooved to ensure sealing performance.

•Control Leakage

All the oil drain valves of the transformer are made of copper valves, and the radiator uses a vacuum butterfly valve to reduce the leakage of the transformer.

•Low Loss, Low Noise

Adopt domestic and foreign advanced technology and equipment, professional research and development. The core adopts high-performance cold-rolled oriented silicon steel sheet and fully automatic robot lamination machine with small shear burr and low lamination coefficient, which effectively reduces the no-load loss, no-load current and noise of the transformer. The no-load loss is 5% to 15% lower than the manual lamination.

•High Reliability

The transformer is equipped with an oil surface thermometer, the top of the fuel tank is equipped with a pressure relief valve with a contact point, the oil level indicator of the oil storage cabinet is an oil level gauge with a contact point, and the high and low pressure casing is an anti-fouling enhanced pure porcelain oil type casing, which can be used for Heavy pollution level environment.

•High Quality Insulated Skeleton Support inside the Coil

The inside of the coil is supported by a high quality insulating skeleton. All coils adopt inner and outer struts, all struts and blocks are chamfered, the electric field is uniform, and the reliability is enhanced. All fasteners on the axial body of the coil are self-locking locknuts, so that the product can withstand long-distance transport bumps without looseness and without the need for a lifting core.

GNEE have 16 years of experience in international power projects and have helped many customers around the world complete power projects. For example, Canada, Mexico, Panama, Ecuador, Guatemala, Honduras, Chile, El Salvador, Australia, New Zealand, Spain, Belgium, Algeria, South Africa, Ethiopia, Myanmar, Kazakhstan, etc. Daelim also have very good after-sales installation service team abroad, so if you have transformer needs, you can contact us.

Hot Tags: 35kv class three phase oil-immersed distribution transformer, China 35kv class three phase oil-immersed distribution transformer manufacturers, suppliers, factory, Substation Distribution Transformers, Ground mounted Distribution Transformers, Three Phase Distribution Transformers, Dry Type Distribution Transformer, Single phase Distribution Transformers Up To 315 KVA, Pad mounted Distribution Transformers