Pole-mounted distribution transformers are mounted above ground on poles. These transformers are manufactured to standard designs, primarily for power distribution companies. These transformers typically service urban and rural residential and commercial loads.
Pole Mounted Transformers are rated anywhere between the range of 16 kVA to 100kVA. They can step 11,000 to 33,000 volts down to an apparently lower voltage of 400 volts. Generally home distribution systems, low volume commercial sites in rural areas utilize pole mounted transformers.
single phase pole mounted transformer
pole mounted transformers parameters
| Rated Power (KVA) |
High Voltage (KV) |
Low Voltage (KV) |
No-load Loss (W) |
On-load Loss | Oil Weight (KG) |
Total Weight (KG) |
| 10 | 34500/ 19920 13800/ 7957 13200/ 7620 12470/ 7200 or others |
120-240 240-480 347 600 |
36 | 120 | 22 | 150 |
| 15 | 50 | 195 | 30 | 210 | ||
| 25 | 80 | 290 | 45 | 258 | ||
| 37.5 | 105 | 360 | 50 | 340 | ||
| 50 | 135 | 500 | 62 | 395 | ||
| 75 | 190 | 650 | 88 | 480 | ||
| 100 | 210 | 850 | 94 | 530 | ||
| 167 | 350 | 1410 | 138 | 680 | ||
| 333 | - | - | - | - |
Pole Distribution Transformer Main Characteristics:
1. Designed by patented technology and software with premium performance.
2. Core is made of high quality cold-rolled grain-oriented silicon steel sheet which produced in step-lap technology.
3. Winding is using high strength enameled wire or paper-insulated wire or copper belt, which offers uniform distribution of ampere-turns, reasonable insulation structure with high ability to withstand short-circuit.
4. Oil tank is corrugated type with high corrosion resistance. Tank surface pre-treatment liquid and coating powder adopts international top brands. The tank is degreasing, pickling, phosphorated, electrophoresis by automatic production lines, then power spray coating and heat-solidify.
5. The active part applies core free-hanging structure. The gasket is made of high-quality acrylate rubber which can inhibit ageing caused by sun and heat.
single pole mounted transformer Advantages:
1. Low loss, low noise, low partial discharge, high reliability.
2. Safety with elegant appearance.
3. Convenient installation and simple maintenance.
4. Compact with small occupied area.
pole Mounted distribution transformer Applications
1. Building Infrastructure and Industrial: Airports, hospitals, factories, shopping malls, hotels, commercial and residential towers.
2. Utility: Generation, transmission, distribution substations, water and waste water treatment plants.
3. Oil and Gas: Oil and gas plants, petrochemical plants and refineries.
pole mounted three phase transformer
Fields of application
our gNEE factory
Packaging&shipping
test creatificate
customer visit case
GNEE Teams
Our have strong R&D team and they have more than 16 years of transformer design experience and are familiar with lots of international transformer standards, such as IEC, IEEE / ANSI,CSA, etc. and instruments with more than 16 years'experience.Excellent and stable quality with best cost performance.Various payment term available.
Hot Tags: pole mounted distribution transformer, China pole mounted distribution transformer manufacturers, suppliers, factory, Single Phase Pole Mounted Distribution Transformer, 250 KVA Single Phase Pole Mounted Transformer, 500 Kva Pole Mounted Transformer, 15 KVA Pole Mounted Transformer, Single Phase Pole Mounted Transformers, 167 Kva Single Phase Pole Mounted Transformer
