Three-Phase Box-Type Pad Mount Substation Transformers

Combined transformer (also known as American box transformer), as an important power supply unit in cable distribution network, the product places high-voltage load switch and high-voltage fuse in the transformer box. The oil tank adopts a fully sealed structure, and the transformer oil in the tank has good insulation and heat dissipation performance. The utility model has the advantages of small volume, light weight, convenient installation and maintenance, safety and reliability, beautiful appearance, etc. It is widely used in cities, residential quarters, hotels, hospitals, factories and mines, oil stations, airports, railways, wharves and other outdoor power supply places.

Pad Mount Substation Transformers

1. Small size and compact structure. The floor area is only about 1/3-1/5 of the floor area of domestic European box type substation with the same capacity. Fully sealed, fully insulated structure, no insulation distance, safe and reliable, excellent transformer performance, low loss.
2. Equip S11 type transformer with low noise and strong overload capacity. It is divided into three parts: main high-voltage chamber, low-voltage chamber and transformer. The conventional layout is the Chinese character font (YBP). The high-voltage side adopts V-type or T-type load switch and two-stage fuse protection, which can be used for loop network and terminal. The power supply mode is flexible and reliable.
3. The high voltage chamber is equipped with oil humidity gauge, oil signal gauge, pressure gauge, pressure relief valve, oil drain valve and other components to monitor the operation of the transformer.
4. High voltage incoming line adopts cable plug and can be equipped with zinc oxide arrester to meet various low-voltage outgoing requirements. According to user requirements, low-voltage metering and shunt outgoing line can be added.
5. The transformer adopts corrugated fins for heat dissipation. After special process treatment, it has strong anti-corrosion ability, various shapes and structures. It can be made of ordinary steel plate, stainless steel and other plates.

Three-Phase Substation Transformers Factory

So far, the company's production and manufacturing process is a one-stop production line, which meets the factory requirements for transformer production and manufacturing, ensures the quality control of the main raw materials in the composition of transformer production, and improves production efficiency and reliability. Keep the transformer factory qualification rate at 99%. 

Hot Tags: three-phase box-type pad mount substation transformers, China three-phase box-type pad mount substation transformers manufacturers, suppliers, factory, Precast Concrete Embedded part, Cold Rolled Grain Oriented CRGO Silicon Steel, aluzinc coils, Galvanized Steel PV Mounting System, cold reduced steel sheet, galvanized metal plate