Cold Rolled Steel Coil Supplied by GNEE STEEL
- Pickling Coil
- Hard Steel Coil
- Cold Rolled Steel Coil
| Full name | Cold Rolled Steel Coil |
| Standard | AISI,ASTM,DIN,GB,JIS,BS,EN |
| Material | SPCC,SPCD,SPCE,ST12,ST12,ST14,ST15,DC01,DC02,DC03,DC04,DC05,DC06 etc |
| Thickness | 0.20-3.0mm |
| Width | 40-1250mm |
| Surface | Oil/dry/passivation/pickling/black annealing/bright annealing |
GNEE STEEL's cold rolled coil products are also available with different finish according to your surface requirements, options are painting, lacquering, electroplating or otherwise.
The sales volume of commercial materials is 2.6 million tons, widely used in industries such as household appliances, light industry, and construction.
Grades of cold-rolled steel sheets that GNEE can supply：
1,Introduction of grades and uses of Cold-rolled steel sheet steel for drawing series
Material category |
Baosteel en erprise standards | Equivalent foreign standard | Description | ||
| Standard number | Grade | Standard number |
Grade | ||
| General use | Q/BQB402-2009 Q/BQB403-2009 Q/BQB408-2009 |
SPCC DC01 BLC |
EN10327 JISG3141 |
SPCC DC01 JSC270C |
Steel for general shaping and processingof refrigerator and other household applianceshell, oil drums, steel furniture |
| Used for drawing | Q/BQB402-2009 Q/BQB403-2009 Q/BQB408-2009 |
SPCD DC03 BLD |
EN10327 JISG3141 |
SPCD DC03 JSC270D |
Steel for the drawing and shaping of household appliances |
| Used for deep drawing | Q/BQB402-2009 Q/BQB403-2009 Q/BQB408-2009 |
SPCE DC04 BUSD |
EN10327 JISG3141 |
SPCE DC04 JSC270E |
Steel for deep drawing and shaping process |
| Used for special deep drawing |
Q/BQB402-2009 Q/BQB403-2009 Q/BQB408-2009 |
SPCF(SPCEN) | EN10327 JISG3141 |
SPCF DC05 JSC270F |
Steel for special deep drawing and shaping process |
| DC05 | |||||
| BUFD | |||||
| Extra deep drawing | Q/BQB402-2009 | SPCG DC06 BSUFD |
EN10327 JISG3141 |
SPCG DC06 JSC260G |
Steel for special deep drawing and shaping process |
| Q/BQB403-2009 | |||||
| Q/BQB408-2009 | |||||
| Used for special extra-deep drawing |
Q/BQB403-2009 | DC07 | EN10327 JISG3141 |
DC07 | Steel with particularly good deep drawing propertie |
2.Mechanical properties of Cold-rolled steel sheet drawing series
| Grade |
MPa Yield strength |
MPa Tensilestrength ≥ |
≥Elongation % A80mm | r90° | n90° | |||||
| Nominal tick ness(mm) | ≥ | |||||||||
| <0.30 | 0.30~<0.50 | 0.50~<0.70 | 0.70~<1.0 | 1.0~<1.6 | 21.6 | |||||
| DC01 | 140~280 | 270 | 24 | 26 | 28 | 30 | 32 | 34 | - | - |
| DC03 | 140~240 | 270 | - | 30 | 32 | 34 | 35 | 36 | 1.3 | - |
| DC04 | 130~210 | 270 | - | 34 | 36 | 38 | 39 | 40 | 1.6 | 0.18 |
| DC05 | 120~180 | 270 | - | 35 | 38 | 40 | 40 | 41 | 1.9 | 0.2 |
| DC06 | 110~170 | 260 | - | 37 | 39 | 41 | 42 | 43 | 2.1 | 0.22 |
| DC07 | 100~150 | 250 | - | 40 | 42 | 44 | 2.5 | 0.23 | ||
| Grade | MPa Yield strength |
MPa Tensile strength ≥ |
≥Elongation%(LO=50mm,b=25mm) | rm | |||||||
| Nominal thickness(mm) | (mm) Nominal thickness |
||||||||||
| <0.25 | 0.25-<0.30 | 0.30-<0.40 | 0.40~<0.60 | 0.60-<1.0 | 1.0-<1.6 | 21.6 | 0.5-<1.0 | 1.0-<1.6 | |||
| SPCC | - | 270 | 25 | 28 | 31 | 34 | 36 | 37 | 38 | - | - |
| SPCD | 240 | 270 | 27 | 30 | 33 | 36 | 38 | 39 | 40 | - | - |
| SPCE | 220 | 270 | 29 | 32 | 35 | 38 | 40 | 41 | 42 | - | - |
| SPCF (SPCEN) |
210 | 270 | - | - | 37 | 40 | 42 | 43 | 44 | - | - |
| SPCG | 190 | 270 | - | - | - | 42 | 44 | 45 | 46 | 1.4 | - |
3.Available range of GNEE Cold-rolled steel sheet for drawing series
| Item | Nominal size(mm) | |
| Thickness | 0.25-3.5 | |
| Width | 800-1830 | |
| Length | Steel plate | 1000-6000 |
| Steel strip | Coil inside diameter:508,610 | |
Hot Tags: cold rolled steel coils, China cold rolled steel coils manufacturers, suppliers, factory, SPCC steel, Ms Steel Coil, Cold Rolled Coils, 201 cold rolled stainless steel coil, cold rolled stainless steel sheet in coil, cold rolled steel sheet in coil
