DIN EN 10130 DC01 Cold Rolled Steel
DC01, material number 1.0330, is a European-standard (EN 10130) cold-rolled, low-carbon steel flat product for cold forming. In skin-passed condition it typically shows yield strength up to 280 MPa, tensile strength 270-410 MPa, and elongation >=28%, with a clean surface suited to painting and enamelling. It is used where deep drawing, bending, and surface quality matter - automotive parts, appliances, and metal packaging.
DC01 belongs to the EN 10130 cold-rolled commercial-quality series (alongside DC03-DC07). It is supplied annealed or skin-passed, and in work-hardened tempers for higher strength. Its consistent mechanical properties and smooth finish make it a default choice for stamped and formed components.
Mechanical Properties (EN 10139)
| Condition | Yield (MPa) | Tensile (MPa) | Elong. A80 >=% | Hardness HV |
| Annealed (A) | - | 270-390 | 28 / 30* | <= 105 |
| Skin-passed (LC) | <= 280 | 270-410 | 28 / 30* | <= 115 |
* A80 / A50 values respectively.
Surface Quality
DC01-A: minor, formability-neutral defects allowed.
DC01-B: uniform, defect-free surface for high-quality paint or electrolytic coating.
Specification
| Item | Detail |
| Standard | EN 10130 / EN 10139 |
| Grade | DC01 (1.0330) |
| Material | Low-carbon cold-rolled steel |
| Condition | Annealed, skin-passed, work-hardened |
| Dimensions | To EN 10130 tolerances; confirm with GNEE STEEL |
Detailed Applications
Automotive stampings: Body panels and structural brackets needing consistent formability.
Appliances: Washing machine tubs, refrigerator liners, and enclosures.
Metal packaging: Cans and closures requiring a clean, drawable surface.
General engineering: Brackets, housings, and bent parts.
Deep-drawn parts: Where DC03-DC07 provide even higher drawability.
Formability and Selection
Choose DC01 for moderate draws; specify DC01-B when the part is painted or coated; choose work-hardened tempers when higher strength is needed without alloying.
Purchasing Guide
Confirm standard, grade/number, condition, thickness, width, coil or sheet, and surface class. GNEE STEEL can match EN and equivalent domestic grades.
Quality and Certificates
Mill test certificates can be supplied with shipments on request, supporting traceability for automotive and appliance customers.




Product details display

Factory photos

GNEE STEEL's qualifications

GNEE STEEL participated in the exhibition

FAQ
Q: What does 1.0330 mean?
A: The EN material number for DC01 cold-rolled steel.
Q: Is DC01 suitable for deep drawing?
A: Yes; for more demanding draws, DC03-DC07 offer higher formability.
Q: What surface quality should I choose?
A: DC01-B for painted/coated parts; DC01-A for less visible parts.
Q: What is skin-passing?
A: A light cold pass that improves flatness and surface for painting.
Q: Can certificates be provided?
A: Yes, mill test certificates are available on request.
Q: What thickness range is typical?
A: Confirm with GNEE STEEL per EN 10130 tolerances.
Q: Is DC01 weldable?
A: Yes, its low carbon content gives good weldability.
Q: How does it compare to SPCC?
A: SPCC is the JIS equivalent; DC01 is the EN grade.
Hot Tags: din en 10130 dc01 cold rolled steel 1.0330 material, China din en 10130 dc01 cold rolled steel 1.0330 material manufacturers, suppliers, factory, DIN EN 10130 DC01 Steel, JIS SPCC Cold Rolled Steel Sheet, A1008 Cold Rolled Sheet, Cold Rolled 1008 Steel Sheet, cold rolled steel plate grades, 316 cold rolled steel plate





