317LMN Steel Plates/Coils
317LMN Steel Plates/Coils

317LMN Steel Plates/Coils

Alloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum stainless steel whose corrosion resistance beats both 316L and 317L.
Send Inquiry
Chat Now

Get a free quote! Contact us today!

Send E-mail: sale@gneegi.com

Tel: +86 15824687445

GNEE supplys 317LMN (UNS S31726) stainless steel plate and coil, austenitic Cr-Ni-Mo with nitrogen, for acidic chloride service. Chemistry: C≤0.030, Cr 17-20, Ni 13.5-17.5, Mo 4.0-5.0, N 0.10-0.20. Mechanical: tensile ≥550 MPa, yield ≥240 MPa, elongation ≥40%, hardness ≤96 HRB. Standards ASTM A240/A480, EN 10088, JIS G4305. MOQ 1 ton, certificates BV/LR/GL/NK/RMRS/SGS. Confirm with GNEE STEEL.

317LMN Steel Plates/Coils

 

Alloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum stainless steel whose corrosion resistance beats both 316L and 317L. The extra molybdenum (4.0-5.0%) plus a deliberate nitrogen addition (0.10-0.20%) raise pitting and crevice corrosion resistance, especially in acidic chloride service - the environments that destroy ordinary 316L. That is why 317LMN is specified for flue-gas desulfurization, pulp and paper, and chemical plants handling hot, chloride-bearing acids. We supply it as both plate and coil to ASTM A240/A480, EN 10088 and JIS G4305, with the full chemical and mechanical certification that coded equipment demands, and can cut standard sizes (1x2 m, 1.22x2.44 m, 4x8 ft) or to your request.

 

Specifications

Item Parameter Value
Grade UNS 317LMN (S31726)
Type Family Austenitic Cr-Ni-Mo stainless (nitrogen-enhanced)
C max 0.030%
Cr Range 17.0 - 20.0%
Ni Range 13.5 - 17.5%
Mo Range 4.0 - 5.0%
N Range 0.10 - 0.20%
Mn / P / S max Chem Mn 2.00; P 0.045; S 0.030
Tensile min 550 MPa (80 ksi)
Yield min 240 MPa (35 ksi)
Elongation min 40% (2 in / 50 mm)
Hardness max 96 HRB (223 HB)
Standard Spec ASTM A240, ASTM A480, EN 10088, JIS G4305
Thickness Range Cold 0.3-3.0 mm; Hot 3.0-120 mm
Size Sheet 1x2 m, 1.22x2.44 m, 4x8 ft, as request
Finish Surface NO.1, 2B, NO.4, BA, satin, hairline, mirror
Cert Mill BV, LR, GL, NK, RMRS, SGS
MOQ Order 1 ton
Port Ship Tianjin, Shanghai, any China port
Payment Terms T/T 30% deposit + balance on B/L or before shipment

 

Send Your Requirements

 

Technical data

317LMN(S31726) stainless steel plate/coil Chemical Composition and Mechanical Property

Grade C Mn P S Si Cr Ni Mo N Cu Other Elements
317LMN(S31726) 0.030 2.00 0.045 0.030 0.75 17.0 - 20.0 13.5 - 17.5 4.0 - 5.0 0.10 - 0.20 --- ---

 

Grade Tensile Strength, min Yield Strength, min Elongation in 2 in. or 50 mm, min, % Hardness, maxC Cold Bend°D
ksi MPa ksi MPa Brinell Rockwell B
317LMN(S31726) 80 550 35 240 40 223 96 not required

 

Applications

317LMN is the choice when 316L is not enough. In flue-gas desulfurization (FGD) scrubbers and ducts, the acidic chloride slurry attacks lower alloys; 317LMN's higher molybdenum and nitrogen hold up far longer. In pulp and paper bleach plants, in chemical and petrochemical towers handling hot chlorides, and in seawater-adjacent process equipment, it resists pitting and crevice corrosion that would ruin 316L.

 

The nitrogen also slightly strengthens the alloy without hurting corrosion resistance. It is not a substitute for duplex or super-austenitic grades in the most aggressive service, but it is the cost-effective step up from 316L. Choose it when your corrosion allowance or past failures show 316L is marginal, and always confirm the environment (chloride level, temperature, pH) with GNEE STEEL before specifying.

 

Procurement & Ordering

Quote by giving the form (plate or coil), thickness, width/length or coil size, surface finish and any cutting service. We hold mill certificates from BV, LR, GL, NK, RMRS and SGS, which supports coded equipment documentation. MOQ is 1 ton, and mixed stainless grades can share a container. Trade terms are EXW, FOB, CIF or CFR, shipped from Tianjin, Shanghai or any China port, with payment by T/T (30% deposit, balance against B/L copy or before shipment). Because 317LMN is a higher-alloy grade, lead time and price track nickel and molybdenum; confirm the valid quotation window when you order. We can laser, plasma, flame or CNC cut plates to your drawings.

 

FAQ

Q: How is 317LMN better than 316L?
A: Higher molybdenum (4-5%) plus nitrogen gives stronger pitting/crevice resistance in acidic chloride service.

Q: What does the nitrogen do?
A: Nitrogen boosts strength and corrosion resistance without the weld-sensitivity of carbon.

Q: Which standards apply?
A: ASTM A240/A480, EN 10088 and JIS G4305.

Q: What certificates do you provide?
A: BV, LR, GL, NK, RMRS and SGS mill certificates.

Q: What is the minimum order?
A: 1 ton; mixed stainless grades can share a container.

Q: When should I step up from 316L to 317LMN?
A: When chloride level, temperature or past corrosion shows 316L is marginal; confirm with GNEE STEEL.

 

Hot Tags: 317lmn steel plates/coils, China 317lmn steel plates/coils manufacturers, suppliers, factory, Q345B Galvanized Steel Pipe, ASTM A53 GI Galvanized Steel Pipe, Sch 40 80 Seamless Galvanized Steel Pipe, ASTM A53 Gr A Hot Rolled Galvanized Steel Pipe, EN10210 Hot Dip Galvanized Oil Drilling Pipe