An Alloy Steel Pipe is used in applications which require moderate corrosion resistance properties with good durability and at an economical cost. To simply put it, alloy pipes are preferred in those areas where carbon steel pipes may fail. There are two classes of alloy steels - high alloys and low alloy steels. Pipes that constitute low alloy steels have an alloying content that ranges below 5%. Whereas the alloying content of a high alloy steel would range between 5% to about 50%. Similar to most alloys the working pressure ability of an Alloy Steel Seamless Pipe is about 20% higher than a welded pipe. So in applications that have a higher working pressure as a prerequisite, the use of a seamless pipe is justified. Though stronger than a welded pipe, the cost is much higher. Furthermore, the risk of intergranular corrosion at the heat affected weld zone is more in a welded product. The visible difference between an Alloy Steel Welded Pipe and a seamless product is the latitudinal seam along the length of the pipe. However, today, with the advancement in technology, the seam present on the Alloy Steel ERW Pipe could considerably be reduced via means of a surface treatment, such that it remains invisible to human eyes.
Specifications Standards of Alloy Steel Seamless Pipe
View Price of MSL/ Jindal Alloy Steel Pipe stock Up to 6 Meters
| Specifications | ASTM A 335 ASME SA 335 |
| Dimensions | ASTM, ASME and API |
| Size | 1/8″NB TO 30″NB IN |
| Tubing Size | 1 / 2" OD up to 5" OD, customs diameters also available |
| Outer Diameter | 6-2500mm; WT:1-200mm |
| Schedule | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Grade | STM A335 Gr. P5, P9, P11, P12, P21, P22 & P91, ASTM A213 – T5, T9, T11, T12, T22, T91, ASTM A691 |
| Length | Within 13500mm |
| Type | Seamless / Fabricated |
| Form | Round, Hydraulic Etc |
| Length | Single Random, Double Random & Cut Length. |
| End | Plain End, Beveled End, Treaded |
Alloy Steel ERW Pipes Chemical Properties
| Alloy Steel | C | Cr | Mn | Mo | P | S | Si |
| 0.05 – 0.15 | 1.00 – 1.50 | 0.30 – 0.60 | 0.44 – 0.65 | 0.025 max | 0.025 max | 0.50 – 1.00 |
Mechanical Characteristics Alloy Steel Chrome moly Pipes
| Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
| 415 min | 205 min | 30 min |
Hot Tags: astm a335 alloy steel pipes, China astm a335 alloy steel pipes manufacturers, suppliers, factory, Q345B Galvanized Steel Pipe, ASTM A53 Gr A Hot Rolled Galvanized Steel Pipe, ASTM A53 GI Galvanized Steel Pipe, Sch 40 80 Seamless Galvanized Steel Pipe, EN10210 Hot Dip Galvanized Oil Drilling Pipe
