Electro-Galvanizing Steel Coil is a cold rolled steel coil with a layer of zinc plated on the surface by electrolysis process. The thickness of galvanized steel coil is 0.5~1.0mm. It is widely used in automobile, home appliance, construction and general manufacturing industries due to its balanced strength, formability and corrosion resistance.


Features of Electro-Galvanized Coil EG Coil
|
Features |
Description |
|
Corrosion resistance |
The zinc layer provides cathodic protection, and its anti-rust ability is better than cold-rolled steel, but weaker than hot-dip galvanizing (GI). |
|
Surface quality |
The coating is uniform and smooth, suitable for subsequent processing such as spraying and electrophoresis, and is often used for appearance parts. |
|
Formability |
It has good ductility and is suitable for processing such as stamping, deep drawing, and bending. |
|
Weldability |
It is better than hot-dip galvanizing and suitable for processes such as spot welding and laser welding. |
|
Cost |
It is higher than hot-dip galvanizing (GI), but lower than galvanized aluminum (GL). |
0.5~1.0mm Electro Galvanized Steel Application Scenarios
|
Industry |
Application areas |
Thickness selection |
Performance requirements |
Representative brands |
|
Automobile |
Inner door panels |
0.7-0.9mm |
Deep drawing |
SECE (JIS) |
|
|
Seat rails |
1.0mm |
High strength |
HC300YD+ZE |
|
Home appliances |
Refrigerator side panels |
0.6-0.8mm |
Surface grade A |
BLD+ZE |
|
|
Air conditioning brackets |
0.8-1.0mm |
Rigidity |
DX52D+ZE |
|
Electronics |
Server chassis |
0.5-0.6mm |
Electromagnetic shielding |
SECC-SD |
|
Construction |
Light steel keels |
0.8-1.0mm |
Low cost |
DX51D+ZE |
|
Fields |
Recommended grades |
Thickness range |
Zinc layer requirements |
Core performance requirements |
|
Automobile exterior panels |
SECC / DX53D+ZE |
0.6~1.0mm |
ZE25/25~ZE40/40 |
High surface quality, formability |
|
Automobile structural parts |
HC220YD+ZE |
0.8~1.0mm |
ZE20/20~ZE30/30 |
High strength, weldability |
|
Home appliance housings |
SECC-N / BLD+ZE |
0.5~0.8mm |
ZE15/15~ZE20/20 |
Corrosion resistance, aesthetics |
|
Building keels |
DX51D+ZE |
0.8~1.0mm |
ZE10/10~ZE15/15 |
Low cost, rigidity |

Typical applications in the automotive field
External covering parts (0.6~1.0mm): door panels, hoods, trunk lids (need high surface quality).
Structural parts (0.8~1.0mm): seat frames, chassis reinforcements, bumper inner panels (need high strength).
Functional parts (0.5~0.8mm): fuel tank caps, wheel arch brackets (need stamping formability).
Storage requirements
Humidity ≤ 70% RH
Avoid sliding between layers (vertical placement recommended)
Requires rust-proof paper packaging
Testing standards
Zinc layer measurement: X-ray fluorescence method (error ±1g/m²)
Surface testing: ISO 8501-1
Mechanical properties: JIS Z2241


FAQ
❓ Q: What is the difference between hot-dip galvanized steel coils?
A: The surface of electro-galvanized steel coils is smoother (suitable for precision parts), and hot-dip galvanized steel coils are more corrosion-resistant (suitable for outdoor parts). Please consult customer service for specific recommendations.
❓ Q: Does it support special zinc layers?
A: Customized zinc layers from ZE5/5 to ZE50/50 are supported, and salt spray test requirements must be provided.
Hot Tags: 0.5-1.0mm electro-galvanized steel coil for automobile, China 0.5-1.0mm electro-galvanized steel coil for automobile manufacturers, suppliers, factory, steel coil gi sheet, gi sheet roll, gi steel coil, hot dipped galvanized rolled coil, Zinc Coated Sheets Coil Galvanized Steel, gi coil galvanized steel





