Galvanized Steel Coil DX51D
DX51D Galvanized coil, a thin steel sheet that is dipped into the molten zinc bath to make its surface adhere to a layer of zinc. At present, it is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously dipped in the bath with melted zinc to make galvanized steel plate; Alloyed galvanized steel sheet.
In various atmospheric environments (rural, urban, industrial, marine) and under specific conditions, DX51D Steel provides a long protection life far exceeding that of ordinary cold-rolled plates, significantly reducing maintenance costs and the risk of failures caused by corrosion, and extending the service life of the product.
Packaging and Shipping

Specification
| Parameter | Specification |
|---|---|
| Standard | EN10346 |
| Material Grade | DX51D |
| Surface Structure | Regular spangle, minimal spangle, or zero spangle |
| Thickness | 0.3 mm – 3.0 mm (customizable) |
|---|---|
| Width | 600 mm – 1,500 mm |
| Coating Mass (Zinc) | Z100 (100 g/m²) to Z275 (275 g/m²) |
| Surface Treatment | Chromate passivation, oiling, or untreated |
|---|---|
| Tensile Strength | 270 – 500 MPa |
| Elongation (A80 mm) | ≥ 22% |
Request a Free Quote Within 24 Hours.
Characteristics and application scenarios of different galvanized layers
1.80g galvanized layer: Suitable for environments with low corrosion resistance requirements, such as ordinary structural parts in dry indoor environments, general packaging purposes, etc. Due to its low cost, it has a high cost-effectiveness and excellent processing performance.
2.120g to 180g galvanized layer: Suitable for medium-corrosive environments, such as outdoor building decoration, industrial equipment housing, etc. These scenes need to withstand a certain degree of sun and rain and a small amount of corrosive gas in the air.
3.275g galvanized layer: Suitable for highly corrosive environments, such as coastal areas or areas with severe industrial pollution. It has stronger corrosion resistance and can provide a longer service life.
Our Factory

Compare different grades
DX51D vs. DX52D / DD51D,DX53D / DD52Ds: Accurately identify your needs
Comparison of key features of DX51D and similar galvanized coil grades
| Features/brand | DX51D | DX52D / DD51D | DX53D / DD52D |
|---|---|---|---|
| Main positioning | General purpose, good formability | Stamping & bending | Deep drawing |
| Cost | Best price/performance ratio | Slightly higher than DX51D | Higher than DX51D |
| Selection Recommendations | An economical choice that meets most good formability requirements | When the stamping requirements are slightly higher than DX51D | When deep drawing requirements are high |
GNEE STEEL's qualifications

GNEE STEEL participated in the exhibition

Hot Tags: galvanized steel coil dx51d, China galvanized steel coil dx51d manufacturers, suppliers, factory, 1006 Hot Dipped Galvanised Steel Coils, Dx51d Galvanized Steel Coil DC01 Z275, Galvanized Gi Coil, gi spangle, galvanized steel coil for roofing sheet, Galvanized coil dc01





