ASTM A36 is a low-carbon (≤0.29% C) structural steel plate, easily welded and formed, with international equivalents S235JR, SS400, Q235 and ST37-2. GNEE STEEL stocks A36 plate (source cites 14–200 mm hot-rolled); confirm size, surface and any galvanizing with GNEE STEEL.
ASTM A36 is a low-carbon structural steel specified by ASTM A36/A36M for general-purpose shapes, plates and bars. With a carbon content of about 0.05–0.29% by weight, it is mild enough to machine, weld and form readily, yet strong enough for most building and fabricating work. It is the most common structural steel in North America and is widely stocked as plate, so designers reach for it whenever a project needs a dependable, weldable structural grade without the cost of high-strength low-alloy steel. (Note: the source page also discussed ASTM A572; that is a different HSLA grade and is excluded here to keep the topic focused on A36.)
Specifications
| Product | ASTM A36 structural steel plate (hot-rolled) |
| Standard | ASTM A36 / A36M |
| Equivalent grades | S235JR, SS400, Q235, ST37-2, S235J2, Q235D |
| Carbon (max) | 0.25% (≤¾"); 0.26% (¾–1½"); 0.27% (1½–2½"); 0.29% (>4") |
| Manganese | 0.80–1.20% (over ¾" thick) |
| Phosphorus / Sulfur (max) | 0.030% / 0.030% |
| Silicon | 0.40% max (≤¾"); 0.15–0.40% (thicker) |
| Copper (min) | 0.20% |
| Stock range (per source) | Plate 14–200 mm hot-rolled; round bar 16–300 mm dia., 6–9 m |
| Surface | Black (as-rolled); galvanizing available on confirmation |
| Heat treatment | Limited effect due to low carbon; not typically quench-hardened |
Applications
A36's blend of weldability, formability and low cost puts it in nearly every structural job: building frames, bridges, walkways, platforms, brackets and general fabrications. It is the default plate for cutting, drilling and welding into machine bases, supports and non-critical pressure-adjacent structures.
Because it lacks nickel and chromium, A36 has little inherent corrosion resistance, so for outdoors it is usually painted or, where the source confirms, supplied as galvanized plate. Designers should not use A36 where high strength-to-weight or low-temperature toughness is critical-those call for A572 or A514. Equivalent grades (S235JR, SS400, Q235) let the same designs be sourced in projects governed by European, Japanese or Chinese standards.
Procurement & Ordering
GNEE STEEL supplies A36 plate and bar from stock (source cites 14–200 mm plate, 16–300 mm round bar). State the required thickness, width/length or bar diameter, quantity and surface condition (black or galvanized) when requesting a quote. Mill certificates can be provided; third-party inspection is accepted. A36 is a mature, widely available grade, but confirm exact stock dimensions and any galvanizing service with GNEE STEEL before ordering, since the source page did not list a full size matrix.
FAQ
Q: Is A36 the same as Q235 or SS400?
A: They are equivalent mild structural grades from different standards (ASTM, GB, JIS); chemistry and strength overlap closely, so they are often interchangeable in design-confirm with GNEE STEEL for your standard.
Q: Can A36 be heat-treated for hardness?
A: Its low carbon limits quench hardening; A36 is normally used as-rolled and strengthened by section size, not heat treatment.
Q: Can A36 plate be galvanized?
A: Yes, A36 is suitable for hot-dip galvanizing; confirm coating and any size limits with GNEE STEEL.
Q: Why does the page mention A572?
A: The source page mixed in A572 (a high-strength low-alloy grade); this rewrite focuses on A36 only to avoid confusing search intent.
Q: What thickness is stocked?
A: Per the source page, plate is 14–200 mm hot-rolled; exact current stock should be confirmed with GNEE STEEL.
Hot Tags: ASTM A36 Steel Plate, China ASTM A36 Steel Plate manufacturers, suppliers, factory, Galvanized G90 Mild Steel Sheet Metal, steel plate galvanized, metal sheet 4x8 galvanized, galvanized metal plate, galvanized steel sheet 4x8, Galvanized metal





