Anti-slip Galvanised Checker Plate DX51D DX52D DX53D

Oct 24, 2025 Leave a message

Non-Spangle Checkered Galvanized Sheet Plate

 

Galvanised steel checkered plate is a type of steel sheet with a raised pattern of diamonds or lines on its surface. Gnee can provide 5-bars, 3-bars, diamond, pointer, tear drop patterns, ect. Our stock has a wide range of popular specifications, or you can contact us for special orders.

 

Gnee provide hot rolled and cold rolled galvanised checker plate. patterns such as diamond, lentil, tear drop, raised grips, ribbed, five bars, three bars, two bars, etc. used in floor board, factory stair boards, deck board, car boards, staircases, lorry beds, elevator floors, etc.,

Non-Spangle Checkered Galvanized Sheet Plate

 

  • Gnee Provides diamond/lentil/tear drop/raised grips/ribbed/five bars/three bars/two bars or Customize

 

Non-Spangle Checkered Galvanized Sheet Plate

 

Parameters Of galvanised checker plate

 

  • Chemical Composition(%)

 

Popular specifications are in short supply!
click to get the specification sheet!

Grade Chemical Components
C Mn P S Alt
SPCC ≤0.12 ≤0.50 ≤0.035 ≤0.025 ≥0.020
SPCD ≤0.10 ≤0.45 ≤0.030 ≤0.025 ≥0.020
SPCE ≤0.08 ≤0.40 ≤0.025 ≤0.020 ≥0.020

 

  • Mechanical Property

 

Property Typical Values
Tensile Strength 400 – 600 MPa
Yield Strength 250 – 350 MPa
Elongation 20% – 30%
Hardness (HB or HRC) Varies based on grade and standard
Impact Resistance Good

 

Weight calculation formula

 

There are two calculation methods here.

Calculate by volume

Weight (kg) = length × width × thickness × density 7.86Kg/m³.

 

Calculate by area

Weight (kg) = length × width × theoretical unit weight (kg/m²).
Note: The theoretical unit weight is the weight of 1 square meter of board. The unit weight of 2 mm thick diamond embossed board is about 16kg/m², and 3mm thick board is about 25kg/m².

 

Common Applications

 

  • Cross-industry Uses

1. Industrial field

Platforms and walkways: factory workshops, oil platforms, and other work areas that require anti-slip.

Equipment housing: mechanical housings, control cabinet, and other protective parts that require corrosion resistance.

2. Architectural field

Stair treads: anti-slip stairs in public buildings and commercial places.

Architectural decoration: applications that take into account both function and aesthetics, such as exterior wall decorative panels and awnings.

3. Transportation field

Vehicle decks: truck compartments, ship decks, and other scenes that require load-bearing and anti-slip.

Transportation facilities: bridge anti-skid plates, bus stop,s and other public transportation facilities.

4. Agriculture and animal husbandry

Farming equipment: facilities that require corrosion resistance and easy cleaning, such as animal pen floors and feed troughs.

Agricultural machinery: anti-slip covers for equipment such as harvesters and tractors.

5. Municipal engineering

Drainage ditch covers: anti-slip and anti-theft covers for urban drainage systems.

Public facilities: scenes with high durability requirements, such as park benches and trash can bases.

 

Non-Spangle Checkered Galvanized Sheet Plate

Non-Spangle Checkered Galvanized Sheet Plate

 

GNEE STEEL's qualifications

 

Non-Spangle Checkered Galvanized Sheet Plate