1.Why are cold-rolled coils unsuitable for use as blades in feed grinders?
Insufficient wear resistance (core weakness)
Working scenario: The blade rotates at high speed, repeatedly impacting, cutting, and grinding hard grains and straw, and may even contain small amounts of sand and gravel.
Material requirements: Extremely high surface hardness and overall wear resistance are required to extend service life.
Insufficient toughness, prone to brittle fracture (safety hazard)
Working scenario: The blade may impact metallic foreign objects (such as nails, nuts) or hard stones mixed in the feed.
Material requirements: Requires good toughness (impact toughness) to absorb impact energy and prevent the blade from chipping or breaking. Flying fragments pose a serious safety hazard.

2.How economically viable is cold-rolled coil?
Blades made from cold-rolled coils have an extremely short lifespan, and the total cost (parts cost + labor + production stoppage loss) caused by frequent downtime for replacement is far higher than that of using professional blades, which have a higher one-time purchase price but a lifespan several times longer.

3.What is the correct material selection for feed grinder blades?
High-carbon tool steel (e.g., T7, T8): High hardness and good wear resistance after quenching, but relatively poor toughness.
Spring steel (most commonly used and classic choice)
Typical grade: 65Mn. This is the most widely used material for crusher blades.
Advantages: Contains manganese (Mn), resulting in good hardenability. After quenching and medium-temperature tempering, it achieves excellent elasticity, toughness, and high hardness, perfectly balancing wear resistance and impact resistance. The cost is also relatively reasonable.
Alloy tool steel/wear-resistant steel:
Examples: 6CrW2Si, Cr12MoV, or dedicated wear-resistant alloy steel plates (e.g., Durax series, JFE EH series, etc.).
Advantages: Contains alloying elements such as chromium (Cr), tungsten (W), and molybdenum (Mo), offering better wear resistance, red hardness (the ability to maintain hardness at high temperatures), and toughness. Used in high-end or heavy-duty crushers.

4.What is the fundamental reason why cold-rolled coils are unsuitable and should not be used to manufacture working blades for feed grinders?
The core requirements for blades are "wear resistance" and "impact resistance," which require specialized materials (such as 65Mn spring steel) and professional heat treatment processes. Cold-rolled coils cannot meet either of these core requirements.
5.What are the risks of using cold-rolled coils to manufacture working blades for feed grinders?
Using cold-rolled coils to make or produce inferior blades will lead to low production efficiency (frequent replacements), increased overall costs, and a serious safety risk of blade breakage and flying out.

