Are color-coated rolls used for the outer shell of medical carts?

Dec 12, 2025 Leave a message

1.What are the potential advantages?

Cost Advantage: Compared to mainstream stainless steel (especially 304/316 medical grade), color-coated steel sheets are more cost-effective.

Color and Aesthetics: A wide range of colors are available, eliminating the need for post-painting and allowing for direct color matching with the hospital environment.

Lightweight: Potentially lighter than some stainless steel solutions while maintaining the same strength requirements.

Color-coated rolls

2.What are the core challenges and major risks?

Coating Damage Risks (Biggest Problem):

Physical Damage: During frequent use, handling, and collisions, the corners and surfaces of the trolley are easily scratched. Once the organic coating is damaged, exposing the underlying galvanized sheet, its corrosion resistance will drastically decrease. In the humid environment of a hospital, where there is frequent contact with chemical reagents, the damaged areas will rust quickly, creating unsanitary conditions.

Chemical Damage: Medical trolleys require daily or even post-use cleaning with strong chemicals such as alcohol, chlorine-based disinfectants, and hydrogen peroxide. These solvents and strong oxidants will slowly corrode the surface of most colored coatings (especially ordinary polyester PE coatings), causing the coating to lose its gloss, chalk, and crack, eventually losing its protective ability.

Hygiene and Cleaning Hazards:

Fine scratches on the coated surface from sharp instruments can become hidden breeding grounds for bacteria.

If a textured coating (such as an embossed one) is used, its uneven surface may be more difficult to thoroughly clean and disinfect than smooth stainless steel.

Durability Expectations: In medical settings involving frequent disinfection and high-intensity use, the lifespan and appearance retention of painted trolleys are typically much lower than those of stainless steel trolleys. The overall cost of frequent replacements may be higher.

Color-coated rolls

3.What are some feasible specific application scenarios?

Limited to environments with low-frequency disinfection and low risk of impact.

◦ For example: medical supply transport vehicles (not entering operating rooms or ICUs), medical record carts, internal office supply carts, etc.

◦ Absolutely avoid using in: high-risk, high-frequency disinfection areas such as surgical instrument carts, ambulances, bedside treatment carts, and central sterile supply department carts.

Color-coated rolls

4.What are the strict requirements for materials and processes?

Selecting Top-Tier Substrate and Coating:

Substrate: Must use high-zinc-weight galvanized or aluminized zinc sheet.

Coating: Polyvinylidene fluoride (PVDF, fluorocarbon) coating is preferred due to its superior chemical resistance and durability. High-durability polyester (HDP) is the second best choice.

Strengthening Structural Design:

All edges and corners must be rounded or edge-wrapped. PVC or ABS plastic corner protectors are best to avoid direct exposure of metal edges.

The structural design should minimize the possibility of impacts to flat surfaces and edges.

Top-Tier Manufacturing Process:

Cuts and bends must be properly coated for protection, ensuring no cuts expose the substrate.

Connections should utilize interlocking edges or concealed fasteners to minimize exposed screw holes (holes are prone to water accumulation and corrosion).

 

5.What suggestions do you have?

Stainless steel is the preferred choice: For trolleys in the vast majority of hospital clinical environments, medical-grade stainless steel remains the only reliable, safe, and economical (from a total life-cycle cost perspective) option.

If color-coated options are considered, rigorous testing is essential:

Require suppliers to provide chemical resistance test reports for the color-coated sheets used (especially resistance to alcohol and disinfectants).

Prepare samples and conduct accelerated wear and disinfection cycle tests to simulate real-world usage conditions.

Clearly define responsibilities and expectations: If purchasing, the contract should clearly specify usage scenario limitations and acknowledge that durability may be limited, requiring future maintenance or replacement.

Consider emerging solutions: Upgraded products such as antimicrobial coated steel sheets for medical devices are available on the market, but their long-term performance and cost need careful evaluation.