1.Why is the high temperature of the desert an extreme test for pre-coated steel rolls?
Extremely strong ultraviolet radiation: The air in desert regions is dry and clean with few clouds, resulting in minimal attenuation of ultraviolet (UV) radiation as it penetrates the atmosphere, leading to extremely high intensity. UV radiation is the primary factor causing the breakage and aging of chemical bonds in resins and pigments in organic coatings (such as paint on color-coated rolls), directly manifesting as fading and loss of gloss.
Extreme high temperatures: Desert daytime temperatures can remain above 40°C for extended periods, with steel plate surface temperatures reaching 70-80°C. High temperatures accelerate all chemical reaction processes, multiplying the aging reactions caused by UV radiation. Simultaneously, high temperatures may cause some heat-sensitive pigments to decompose.
Large diurnal temperature range: The diurnal temperature range in deserts can reach 20-30°C or more. The coating and the steel substrate constantly expand and contract with temperature changes, and long-term cyclic stress easily leads to the formation of microcracks in the coating. These cracks further accelerate aging and erode the coating internally.
Hot, dry winds and sandstorms: Strong winds carrying sand and dust abrade the coating surface, damaging the smooth layer and gloss, making the coating more susceptible to contaminant absorption and direct UV radiation.

2.How should coating systems be selected in high-temperature desert regions?
PVDF fluorocarbon coating is the preferred choice: This is currently the best-performing commercial-grade coating in terms of weather resistance. PVDF resin has extremely strong chemical bonds and excellent resistance to UV degradation. Standards require a PVDF resin content of no less than 70%. In desert regions, ultra-weather-resistant PVDF or modified fluorocarbon coatings should be selected, with a gloss and color retention lifespan of over 20 years.
Use polyester coatings with caution: Ordinary polyester (PE) coatings generally have poor weather resistance and may show noticeable fading within a few years in desert environments. High-performance polyester (HDP) is slightly better, but still falls short of fluorocarbon. Ordinary polyester coatings are not recommended for important or long-lasting desert projects.

3.How should coating thickness be selected in high-temperature desert regions?
A thicker topcoat coating is required. Under standard or normal conditions, the topcoat thickness may be 15-20 μm. For desert areas, a topcoat thickness of at least 20 μm is recommended, ideally 25 μm or more. A thicker coating means more pigment and resin to resist erosion, providing a longer protection period.

4.How to choose color-coated steel rolls suitable for high-temperature desert regions?
Pigment Quality:
Highly weather-resistant and UV-resistant inorganic pigments or specially treated organic pigments must be used. Cheap pigments decompose rapidly under strong UV light.
Base Plate Quality and Coating:
Select high-quality hot-dip galvanized steel (GI) or aluminized zinc steel (AZ). The coating weight (e.g., AZ150, GI180) should be sufficiently high to ensure long-term corrosion protection and prevent rusting even with minor coating damage.
Production Process:
Choose reputable, large-scale color-coated steel sheet manufacturers. Their coating formulations, pretreatment processes (such as passivation), coating precision, and curing processes are more controllable, ensuring consistent product quality.
5.What are some suggestions for project procurement in desert areas?
Clearly define technical standards: The contract and technical specifications should explicitly require specific indicators such as "ultra-weather-resistant PVDF fluorocarbon coating," "topcoat thickness ≥ 25μm," and "aluminized zinc-plated steel sheet AZ150 and above."
Request testing reports and warranties: Request the supplier to provide coating weather resistance test reports (such as QUV accelerated aging test, xenon lamp aging test), with higher data being better. Also, inquire about their warranty period for products used in desert environments.
Conduct on-site case studies: If possible, examine actual engineering cases where the supplier's products have been used for 3-5 years in similar harsh environments (such as arid Northwest regions) to observe their color retention.
Consider color selection: Light colors (especially white) reflect sunlight, have a lower actual coating temperature, and are relatively less sensitive to ultraviolet radiation, generally making them more weather-resistant than dark colors (such as dark blue and brown).

