Can color-coated coils be stamped into shape?

Dec 03, 2025 Leave a message

1.What are some common coating problems after stamping and what are their causes?

Coating Cracking/Peeling:

Causes: Insufficient coating ductility, insufficient die clearance, too small bending radius, poor lubrication.

Location: Usually occurs on the outer surface during bending or stretching.

Surface Scratches/Abrasion:

Causes: Rough die surface, impurities, or insufficient cleanliness of the coil surface.

Coating Wrinkling:

Causes: Insufficient adhesion between the coating and the substrate in the compression area, causing localized bulging of the coating.

Uneven Color/Gloss:

Causes: Localized frictional overheating leading to changes in the coating's microstructure, or lubricant residue.

Color-coated rolls

2.How do coating flexibility and adhesion affect stamping?

Choose a "stamping grade" or "deep drawing grade" coating. These coating formulations offer higher ductility and resistance to flexural cracking.

This is a prerequisite for successful stamping. Standard coatings may be too hard or too brittle, making them prone to microcracks during deformation.

Color-coated rolls

3.How do mold design and condition affect stamping?

Use high-quality, specialized molds to ensure:

- Highly polished and smooth working surfaces.

- Precise clearances, slightly larger than those for standard steel sheet stamping (generally recommended to be 10-15% larger than the material thickness).

- Sufficiently large corner radii to avoid sharp angles.

Reduce friction between the coating and the mold to prevent scratches; provide more room for deformation of the coating and the substrate to reduce extrusion and shear stress.

Color-coated rolls

4.How do stamping speed and pressure affect stamping formation?

Use a relatively low and steady stamping speed to avoid impact. Adjust the pressure to just complete the forming process.

High speed and excessive pressure can generate instantaneous high heat and huge shear force, which can easily lead to localized peeling or scorching of the coating.

 

5.How does substrate selection affect stamping type?

Select the appropriate grade based on the degree of deformation (such as CQ general commercial grade, DQ general stamping grade, DDQ deep drawing grade).