1.What are the effects of coating aging and degradation?
Ultraviolet Radiation: Ultraviolet radiation from sunlight is the main culprit in coating aging. It breaks the chemical bonds of the coating's polymer resin, leading to:
Loss of Gloss and Fading: Degradation of pigments and resins.
Chalking: Formation of a loose powdery layer on the coating surface.
Heat and Moisture:
Thermal Expansion and Contraction: Repeated cycles cause stress accumulation within the coating, resulting in microcracks.
Hydrolysis: Moisture (especially at high temperatures and humidity) penetrates the coating, causing resin hydrolysis and reducing adhesion.
Chemical Erosion: Acid rain, industrial pollutants, salt spray, etc., can react chemically with the coating components, eroding the coating.

2.What are the consequences of poor substrate pretreatment quality?
Incomplete degreasing: Oil residue on the substrate surface prevents the conversion film and coating from adhering firmly.
Poor conversion film quality: If the conversion film is too thin, uneven, or poorly crystallized, its corrosion protection and adhesion-enhancing functions are significantly reduced. This is one of the root causes of "under-film corrosion."

3.What are the effects of mechanical damage or cut corrosion?
Construction and Installation Damage: During transportation, hoisting, and installation, the coating may be scratched, abraded, or impacted by hard objects.
Processing Cuts: Exposed metal cuts created by shearing, punching, drilling, etc., are the weakest points where corrosion first occurs and spreads. Although aluminized zinc substrates have "self-healing" capabilities, they still require protection in harsh environments.
Bending Cracking: Insufficient bending radius or inadequate coating flexibility during forming can lead to micro-cracks invisible to the naked eye at bending points, allowing corrosive media to penetrate.

4.What impact will environmental factors and design issues have?
Harsh Environment: Prolonged exposure to high humidity, high salinity (coastal areas), high acidity/alkalinity (industrial areas), or strong ultraviolet radiation (high altitudes) exceeds the coating's design tolerance limits.
Design Defects:
Water Accumulation: Insufficient slope in the roof or wall panel design leads to chronic water accumulation.
Contact Corrosion: Direct contact with different metals (such as copper or untreated steel) causes electrochemical corrosion.
Poor Ventilation: Poor ventilation and heat dissipation between the double-layer panels prevent condensation from draining, creating a stuffy, humid environment.
5.What are the prevention and solution strategies?
Proper Material Selection:
Choose the coating system based on the application environment (e.g., PVDF fluorocarbon or HDP high-durability polyester are preferred for coastal and industrial areas).
Select reputable suppliers with stable production processes to ensure pretreatment and coating quality.
Standardized Processing and Application:
Use protective pads during processing to avoid scratches.
Apply timely and meticulous sealing protection to all machined cuts and drilled holes using specialized color-coated steel repair paint or sealant.
Use soft lifting tools during installation to avoid friction.
Optimal Design:
Avoid structures prone to water accumulation and ensure proper ventilation and drainage.
Avoid direct contact with incompatible materials.

