Can galvanized coils be used to make backing plates for car brake pads?

Nov 04, 2025 Leave a message

1.Why are ordinary galvanized coils unsuitable?

Insufficient High-Temperature Resistance

Core Issue: During braking, the high temperatures generated by friction can easily reach 400°C or even above 700°C.

Weakness of the Galvanized Layer: Zinc's melting point is approximately 419°C. At high temperatures, the galvanized layer softens, melts, and may even vaporize. This not only leads to the failure of the anti-corrosion layer but, more dangerously:

Contamination of the Friction Pair: Vaporized zinc may contaminate the brake disc and the opposing brake pads, affecting braking performance.

Gas Generation: At high temperatures, this may affect the contact between the brake pads and the brake caliper, creating an "air cushion" effect and reducing braking efficiency.

Extremely High Strength and Rigidity Requirements

Brake pad backing plates require extremely high strength and rigidity to withstand enormous hydraulic clamping and shearing forces, preventing deformation during braking.

The base material of ordinary galvanized coils (usually low-carbon steel such as SPCC) is far from strong enough. Brake pad backing plates require high-strength steel, and sometimes even specially formulated high-strength low-alloy steel.

Adhesion Issues

The friction material of the brake pads (the black part) is bonded or riveted to the backing plate under high temperature and pressure.

The galvanized layer has a smooth surface and undergoes changes at high temperatures, which can severely affect the adhesion strength between the friction material and the backing plate. In extreme cases, this can cause the friction material to detach, resulting in a serious safety accident.

galvanized coil

2.What is the base plate of the brake pad backing plate?

High-strength steel/low-alloy high-strength steel: This is the absolute mainstream choice. Through the addition of microalloying elements and controlled rolling and cooling processes, they achieve strength and rigidity far exceeding that of ordinary low-carbon steel.

Required properties: High yield strength, high tensile strength, and good ductility.

galvanized coil

3.What are the effects of surface anti-corrosion treatment?

Electrophoresis: This is the most common and mainstream process. Cathodic electrophoresis, in particular, provides a uniform, dense, and highly adhesive coating with excellent corrosion resistance. The coating itself can also withstand the high temperatures of braking.

Dacromet: A non-toxic anti-corrosion coating technology with excellent heat corrosion resistance, also very suitable for brake pad backing plates.

Phosphating: Usually used as a pretreatment for electrophoresis or coating to increase coating adhesion; it also has some rust-preventive properties.

Powder Coating/Spraying: Applying a powder coating using high-temperature resistant epoxy resin or other powder coatings.

galvanized coil

4.What are the differences in high-temperature resistance between ordinary galvanized coils and professional brake pad backing plates?

Ordinary galvanized coils have poor high-temperature resistance, with zinc's melting point around 419°C; professional brake pad backing plates offer superior high-temperature resistance (the base material is steel, which has a high melting point; the coating is heat-resistant).

 

5.What are the differences in the anti-corrosion processes between ordinary galvanized coils and professional brake pad backing plates?

Ordinary galvanized coils are hot-dip galvanized; professional brake pad backplates are treated with cathodic electrophoresis, Dacromet coating, and powder coating.